Bender Alphabeti Notice: This is a satire account Full Member Minuteman Feb 12, 2014 13,339 47,967 Cheyenne WY. Feb 16, 2018 #1 Feb 16, 2018 #1 56mm objective on a gen2 RPR. High rings correct? I still want it low as I can get, if that makes sense. Are one pice mounts all “high”?
56mm objective on a gen2 RPR. High rings correct? I still want it low as I can get, if that makes sense. Are one pice mounts all “high”?
whatsupdoc Old Salt Full Member Minuteman Dec 12, 2017 3,421 5,608 Feb 16, 2018 #2 Feb 16, 2018 #2 I have a 56mm on a gen2. Distance from the top of the rail to the centerline of the ring is 1.550 inches. That gives me about .25 between the scope flip cap and the handguard, just enough for my scopecoat. Reactions: Bender
I have a 56mm on a gen2. Distance from the top of the rail to the centerline of the ring is 1.550 inches. That gives me about .25 between the scope flip cap and the handguard, just enough for my scopecoat.
E EDDK9 Sergeant Full Member Minuteman May 6, 2017 130 28 Feb 16, 2018 #3 Feb 16, 2018 #3 Im using an RRS 1.26” mount on my Steiner M 56mm objective with Aadmount caps. No clearance issues. Reactions: Bender
