Does anyone have any load data for a 6.5/284? the only powder i tried was h4831 and i wasnt really ever getting the velocity i wanted. any input would help
6.5/284 loads
- Thread starter Shoot4Life
- Start date
M
milo 2.0
Guest
Re: 6.5/284 loads
Try this link.
If you really want some help you need to mention what bullet you are using.
http://www.6mmbr.com/SixFive284.html
Try this link.
If you really want some help you need to mention what bullet you are using.
http://www.6mmbr.com/SixFive284.html
Re: 6.5/284 loads
I had good results with RL22 50.0 - 53.0grs with 130 to 142 gr. bullets. As always those loads were safe in my rifle. Please start low & work up.
I had good results with RL22 50.0 - 53.0grs with 130 to 142 gr. bullets. As always those loads were safe in my rifle. Please start low & work up.
Re: 6.5/284 loads
I used to get good results with 45.5gr of IMR 4350, lapua brass, federal match primer, firing a 142gr Sierra MK out of a 26" krieger barrel. That barrel was a tight neck. That was two years ago and I definitely wouldn't start with this load.
I used to get good results with 45.5gr of IMR 4350, lapua brass, federal match primer, firing a 142gr Sierra MK out of a 26" krieger barrel. That barrel was a tight neck. That was two years ago and I definitely wouldn't start with this load.
Re: 6.5/284 loads
ive had the best luck with 56.7 gr retumbo, cci br2 primer, 140 a-max, and OAL 3.090
ive had the best luck with 56.7 gr retumbo, cci br2 primer, 140 a-max, and OAL 3.090
