Hey guys let's see you load data for the 6.5 lapua I know there are some good loads out there.
- Thread starter shooter.dm
- Start date
I use 39.0 grins of h4350 for my dads 24" gun. I'm not sure on fps but the accuracy is there. I loaded some hornady 120 Amax and it shot one hole groups. I loaded these just for practice since he is new to the 600 line. However, I do use 40.7gns of h4350 with 130 Berger vlds. For match loads.
Last edited:
Im planing on use the 130gr berger vld maybe varget powder because its temp stable I would like to run them around 2800fps if possible
130gr JLK, 41.7gr H4350, BR4 primer, at OAL 2.850", 2925fps from my 26" 8-twist Hart
107gr SMK, 39.3gr RL-15, BR4 primer, at OAL 2.750", 3000fps from my 21" 9-twist Kreiger
insanely easy cartridge to load for...
107gr SMK, 39.3gr RL-15, BR4 primer, at OAL 2.750", 3000fps from my 21" 9-twist Kreiger
insanely easy cartridge to load for...
Any one elce
Here are my results with 123 Scenars seated .015" out of the lands / Varget (36.8gr to 38.4gr in .2gr increments) / BR4 primers / New brass:
That target looks great swagger
Thanks bud.. Im going to be doing a work up soon with my other 6.5x47L (Scalpel) with RL-15. Shot it yesterday with 37.4gr / 123 Scenars and was roughly a 1/4" for 3 shots at 100 yards and just over 1" for 5 shots at 300 yards.
Any new updates
43 grains 4350 in my 27.5" Brux with a fed 205 velocity is 3017
What grn bullet
First load 130 VLD, CCI 450 primers and 35.3 of RL-15. I have 123's to play with but have not yet had the time to load. So far, out to only 200, it shoots extremely well, and the brass is nice and cold coming out. Did not crono yet so no data.
I'm using 40.7gr of H4350, CCI 450 and 130 VLD. Velocity is 2866 fps out of a 26" Bartlein 5R. Bullet seated at the lands. 2.140" ogive measurement with I believe a .160" freebore. Very consistent low to mid .3's. The other day for grins, I had loaded 10 using the GM205M and 10 with CCI400. The GM load pulled about a .75" and the CCI layed out a .167". At 400yds, the GM had 1.625" vertical and the CCI had .736". I believe more testing is called for.
Berger reloading data says max load for 130 vld and varget is 35.8 @ 2700 how are u guys charging 37 grns with out going boom
If you don't see pressure signs @ 35.8 increment slowly. Once you get the slightest sign of pressure. Back off. Thats probably how they are getting to 37 grs.
It must be
Oops 130 VLD
Thanks all keep them coming
6.5x47 Lapua
Hart 1-8 25 inch
Berger 140LRBT
RL17
205m
41.2grs
2977 FPS
SD 3
ES 11
Oh yeah it's a bug hole load
Hart 1-8 25 inch
Berger 140LRBT
RL17
205m
41.2grs
2977 FPS
SD 3
ES 11
Oh yeah it's a bug hole load
Have seen jbailey shoot the 107 load. As long as he doesn't forget he has 100 yard dope dialed in *cough* *cough* its hella accurate @ 600 yards.
Any one use h414 is it a good powder
I know there are more out there
Just a quick question.. How is the 6.5x47 LAPUA as far as barrel life ?
Exact Post I was looking for--tag
Around 4k on barrel life 5 if u don't hotrod them
TAG.............................................
Whats the fastest powder anyone has used with the 120-123grn bullets?
My current load is 38grn RL-15 over a 123 A-max with cci 450 primers pretty much the same as most other people its doing 2850fps
Is RL-15 too fast to use with heavier bullets? 130-140 weight range?
My current load is 38grn RL-15 over a 123 A-max with cci 450 primers pretty much the same as most other people its doing 2850fps
Is RL-15 too fast to use with heavier bullets? 130-140 weight range?
Lets keep them coming
123gr Nosler CC
38.4gr Varget
Wolf SM primer
2920 FPS out of a 22" Brux
38.4gr Varget
Wolf SM primer
2920 FPS out of a 22" Brux
123gr Scenar/130 vld
37.4 grains of RE15
BR4 primers
2930 fps-26" Kreiger SS
Robert Gradous built on 591R action
30p-1 suppressor
FL sized/ brass last up to 25 reloads
under 1/4 MOA consistently
37.4 grains of RE15
BR4 primers
2930 fps-26" Kreiger SS
Robert Gradous built on 591R action
30p-1 suppressor
FL sized/ brass last up to 25 reloads
under 1/4 MOA consistently
Gradous Rifle
Lapua Brass with necks cleaned up
140 Berger Hybrid
CCI 450
37.6 grains of Varget
Crazy accurate
Lapua Brass with necks cleaned up
140 Berger Hybrid
CCI 450
37.6 grains of Varget
Crazy accurate
Bump to the top
123smk
37.8 Varget balance beam / digital says 38.1
2920 avg
Going to try h4350 when I can get some at a reasonable price.
37.8 Varget balance beam / digital says 38.1
2920 avg
Going to try h4350 when I can get some at a reasonable price.
Is there a big difference between running the br4 to the br450 becaus I tried the 130gn vld 37.5 gr varget load with the br4 and it sucks I only have 30 rounds down my pac nor pipe if that makes a difference
Remington 700
25" Krieger 4 grove 8 twist
AICS 1.5
I settled on 41.3 grains of H-4350 with Berger 130 Berger VLD Match and Remington 7.5 Primer and Lapua Brass.
5 shot at 110 yards
25 shot group at 1000 yards
Drop the load to 40.0 grain on a new lot of H-4350. This load was untested but still performed will at 1000 yards. This load barely went over 2800 fps. Here's the 25 shot group.
25" Krieger 4 grove 8 twist
AICS 1.5
I settled on 41.3 grains of H-4350 with Berger 130 Berger VLD Match and Remington 7.5 Primer and Lapua Brass.
5 shot at 110 yards
25 shot group at 1000 yards
Drop the load to 40.0 grain on a new lot of H-4350. This load was untested but still performed will at 1000 yards. This load barely went over 2800 fps. Here's the 25 shot group.
Anyone have new pet loads with the 136 or 139's?
Tag for when my '47 gets built. Great info guys
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
Any updates with the berger 140 btlr and varget
M
milo 2.0
Guest
136 scenar
39.9gr VV N550
205M
2850fps
Stiller action, Mullerworks 8tw 3 groove barrel
One accurate package!
