6.5 Cr 147ELD

[Leonard Barnes]

Has anyone have a load data for the 147 ELD for a 6.5 Creedmoor with a 28” LRI barrel by chance? Thanks

 

[2aBaC̶a̶]

There is a thread in the reloading section with 24 pages of info on 6.5 loads

 

[Leonard Barnes]

Thanks I must of over looked it

 

[2aBaC̶a̶]

Curious what you find the trend to be, I've been thinking of going 147 myself.

 

[Leonard Barnes]

I just loaded some up with h4350 but haven’t got to shoot them yet it’s 1-8” twists LRI barrel 28” will let you know how I fare when wind calms down

 

[chevy_man]

Hornady brass, fed 210, 147 eld-m, I've been using 40.5 grn h-4350. With a 24" barrel and a suppressor I'm right about 2700. Zero pressure signs, I had ejector marks at 41.8grn.

So far brass is doing great, at 5 firings. I started annealing every load after I had crazy SD after the 3rd loading.

 

[Hiwayman92]

Peterson SRP brass, 147 @ 2.80, 47 grains of Reloder 26, 2,870 fps in my 26” Bartlein that isn’t even broken in yet. .5 moa 5 shot groups!

 

[Leonard Barnes]

I’m planning on going out Saturday to test wind is supposed to be tolerable but it’s muddy as heck so it might be a challenge getting to range but mud I can deal with wind I can’t lol

 

[JOE62]

I’ve got some 147’s loaded up but I haven’t tried them yet. Using H4350, Lapua brass and CCI 450’s. Seated.020 OTL using a 26” Shilen barrel. I’ve been rebuilding my range and haven’t had a chance to shoot yet but I’m about done with it. I’m at 200’ asl, high temps in the 90’s and humidity in the 70-80% range so I should reach max charge early and not a lot of speed. I’ve read the thread with the 25 pages and not much on the 147’s.