I just ordered a reamer and a set of dies for the 6.5Super LR. Is there anyone that would like to share loads? Thanks.
- Thread starter Emilio
- Start date
Anyone ? ?
In know that 4350 seems to be the powder of choice for this cartridge.I will check with my friends who shoot this wildcat at report back.
Regards,Mike
Regards,Mike
from this thread: http://www.snipershide.com/shooting...stics/119335-6-5mm-slr-s-exercised-today.html
*** please be careful, these loads probably should just be made fun of and not really used, think of them as the "Wile-y Coyote" loads....they also may fall under CA proposition 65, the Geneva convention, and the Surgeon General would at least scowl at them.****
Specs:
rifle chambered "6.5mm Super LR/s", 30" 1:8" barrel, 44 rds down the tube - clean bore for today.
Conditions:
approx 9400ish feet, 60*, bluebird skies- prob just over 30 in Hg? (39.609974,-105.992129)
*life has not left much time to do full 5rd+ workups yet on everything-was just glad to get out and learn more today.
*(used daisy chained CED chronos, first at 10' and at 12'-numbers below given in that order)
*all rounds today were new Win brass, sized, flash hole deburred, neck chamfered only, BR2 primers.
130gr Berger VLD, 2.900" coal,
H4350
43.5g-2985/2978fps
44.0g-3003/2999
44.5g-3042/3039
3058/3053
44.8g-3066/3062
3081/3077
45.1g-3149/3133
3121/3106
45.4g-3135/3121
3180/3170
^showing no pressure signs...will load easily another half grain to a full grain more for next round to find pressure max, last four shots dropped on top of each other. VERY pleased with that little data set.
142gr SMK 2.850" COAL
Reloader 17 (conservative in max charge weights for temp sensitivity precaution)
43.0gr R17
Error/3028
2989/3002
2997/3006
2993/3005
2957/2967
43.3gr R17
2972/2989
2982/2998
2992/3007
2988/3003
3002/3015
43.6gr R17
3012/3027
3010/3016
3019/3035
3022/3035
3020/3038
nearer chrono es/sd 10/3, second chrono es/sd 22/7 not bad!
43.9gr R17
3016/3027
3037/3042
3050/3061
3038/3055
3017/3038
44.2gr R17
3056/3058
3048/3044
3046/3042
3060/3055
3037/3032
near chrono es/sd 23/7, second es/sd 26/9
no signs of pressure, accuracy plenty good, will be hard to pick a load until I can run these at 300yds to see what is going on.
142gr SMK H4350 2.850" coal
43.6gr H4350
2919/2929
2920/2936
2943/2959
43.9gr H4350
2947/2963
2947/2968
2947/2975
2953/2969
2953/2966
accuracy very good, no pressure signs, just wanted to double check speeds as the 43.9g load is very accurate.
stopped at 45.0gr H4350 previously where I had a mild case head swipe and primer leakage
*** please be careful, these loads probably should just be made fun of and not really used, think of them as the "Wile-y Coyote" loads....they also may fall under CA proposition 65, the Geneva convention, and the Surgeon General would at least scowl at them.****
Specs:
rifle chambered "6.5mm Super LR/s", 30" 1:8" barrel, 44 rds down the tube - clean bore for today.
Conditions:
approx 9400ish feet, 60*, bluebird skies- prob just over 30 in Hg? (39.609974,-105.992129)
*life has not left much time to do full 5rd+ workups yet on everything-was just glad to get out and learn more today.
*(used daisy chained CED chronos, first at 10' and at 12'-numbers below given in that order)
*all rounds today were new Win brass, sized, flash hole deburred, neck chamfered only, BR2 primers.
130gr Berger VLD, 2.900" coal,
H4350
43.5g-2985/2978fps
44.0g-3003/2999
44.5g-3042/3039
3058/3053
44.8g-3066/3062
3081/3077
45.1g-3149/3133
3121/3106
45.4g-3135/3121
3180/3170
^showing no pressure signs...will load easily another half grain to a full grain more for next round to find pressure max, last four shots dropped on top of each other. VERY pleased with that little data set.
142gr SMK 2.850" COAL
Reloader 17 (conservative in max charge weights for temp sensitivity precaution)
43.0gr R17
Error/3028
2989/3002
2997/3006
2993/3005
2957/2967
43.3gr R17
2972/2989
2982/2998
2992/3007
2988/3003
3002/3015
43.6gr R17
3012/3027
3010/3016
3019/3035
3022/3035
3020/3038
nearer chrono es/sd 10/3, second chrono es/sd 22/7 not bad!
43.9gr R17
3016/3027
3037/3042
3050/3061
3038/3055
3017/3038
44.2gr R17
3056/3058
3048/3044
3046/3042
3060/3055
3037/3032
near chrono es/sd 23/7, second es/sd 26/9
no signs of pressure, accuracy plenty good, will be hard to pick a load until I can run these at 300yds to see what is going on.
142gr SMK H4350 2.850" coal
43.6gr H4350
2919/2929
2920/2936
2943/2959
43.9gr H4350
2947/2963
2947/2968
2947/2975
2953/2969
2953/2966
accuracy very good, no pressure signs, just wanted to double check speeds as the 43.9g load is very accurate.
stopped at 45.0gr H4350 previously where I had a mild case head swipe and primer leakage
Last edited:
