I am having trouble getting the 140ELDM to shoot in my 6.5x47. Here are the specs and info on the rifle.
Bighorn TL3 action
Benchmark 26" mtu barrel
Chamber fit and chambered by benchmark barrels.
Distance to lands = 2.097"
Load: 140ELDM .015 off lands, 39.9 gr of H4350 @ 2785 fps
This load is in the high node before any pressure signs. Gun will shoot .5" with some groups smaller but most around that size. My other rifle chambered in this case with 130 eldm shoots bug holes. Seems like the bullet is seats way down in the case (base of bullet on the 140's sits about half way down the shoulder). Should I just try bergers or have others had problems with this bullet?
Thanks for the help
Bighorn TL3 action
Benchmark 26" mtu barrel
Chamber fit and chambered by benchmark barrels.
Distance to lands = 2.097"
Load: 140ELDM .015 off lands, 39.9 gr of H4350 @ 2785 fps
This load is in the high node before any pressure signs. Gun will shoot .5" with some groups smaller but most around that size. My other rifle chambered in this case with 130 eldm shoots bug holes. Seems like the bullet is seats way down in the case (base of bullet on the 140's sits about half way down the shoulder). Should I just try bergers or have others had problems with this bullet?
Thanks for the help