Guys,
For those that have 6.5 x 47 Lapua's, what twist rate do you run and why??? Thanks!
For those that have 6.5 x 47 Lapua's, what twist rate do you run and why??? Thanks!
- Thread starter PharmShooter
- Start date
1-8 on both my 6.5x47's. Because thats what was avaliable and ready to ship.
now if I was gonna have a blank made id probably go with a 1-9.5 or 1-10 just because I only run the 123 class bullets. although Im gonna try some 140 berger hybrid's in my single shot 6.5x47 at some ELR distances this summer.
now if I was gonna have a blank made id probably go with a 1-9.5 or 1-10 just because I only run the 123 class bullets. although Im gonna try some 140 berger hybrid's in my single shot 6.5x47 at some ELR distances this summer.
I have a 8 twist and a 9 twist 6.5x47L. Either twist will work but would recommend 8 if you are going for the long 140 grainers (believe the longest 140grainer is the Berger Hybrid at ~1.43"). If you are just running the 123gr, 9 is fine, as those are in the ~1.32" OAL.
My 6.5x47 Lapua is a hart barrel 1-8 twist. I knew I wanted to run a high BC 140gr Berger LRBT bullet. I'm running RL17 with 41.2grs at 2977 with a SD of 3 and ES of 11. I wouldn't start with that load but be safe and work your way up.
8 twist out of a 30 inch Krieger for my first. I wanted to be able to run the 130 Bergers with the option to run the 140 Bergers as well once I got some velocity information.
I have 8.5, but it's still getting built.
1-8.5 24" Krieger shoots 130 Berger hunting vlds into one ragged hole almost as good w/ 123s
8 twist. You can shoot heavy bullet with it.
I've shot about 3,000 130 JLK's and 1,000 140 JLK's through an 8.5 and it stabilized them fine down to -500 DA, which is about the lowest I've shot in.
Faster the better, I'd recommend a 1/8twist and you'll be happy.
~Reagan
~Reagan
I have an 8.4 twist Obermeyer barrel and have had no problems with various 140 grain bullets.
Have a 8.5 twist. 26" kreg.
130 Berger VLD's under Varget.
Shoots like a laser !
Beanland built..... of corse
Some people shot the 140's in a 8.5 twist. I have never tried
It. But, they have good luck w/ them.
Just my experience. Hope it helps.
M
130 Berger VLD's under Varget.
Shoots like a laser !
Beanland built..... of corse
Some people shot the 140's in a 8.5 twist. I have never tried
It. But, they have good luck w/ them.
Just my experience. Hope it helps.
M
My two have been 1-in-8.
A little too much twist is WAY WAY BETTER than not quite enough.
Lefty
A little too much twist is WAY WAY BETTER than not quite enough.
Lefty
Berger recommends 1-in-8 for their 130 and 140 gr VLDs, hybrids, and long-range boattails.
In the past they were LESS conservative than other sources.
In the past they were LESS conservative than other sources.
i went with a 1:8 Bartlein, to allow me the option of the 140 - 142 grain bullets. No such thing as too much twist.
I know I’m digging up an old post, but. How did the 6.5x47 shoot with the 18” barrel. I am getting ready to build one with either an 18” or 20” barrel. What would your recommendation be in twist rate and what bullets should I use. Thanks in advance.
