Part 6:
The mag catches are cast and usually have lots of bumps and high spots that need stoned off.
You want the catch to work quickly and smoothly with no drag. When we start tuning things later this will be important.
Check the spring and plunger for any burrs that drag in the hole.
Make sure the catch pivots easily on the pivot pin and the hole is not too tight around the pin.
Take some cold blue when you're done and touch everything up.
The mag catches are cast and usually have lots of bumps and high spots that need stoned off.
You want the catch to work quickly and smoothly with no drag. When we start tuning things later this will be important.
Check the spring and plunger for any burrs that drag in the hole.
Make sure the catch pivots easily on the pivot pin and the hole is not too tight around the pin.
Take some cold blue when you're done and touch everything up.
