6CM powder load...suggestions?

[SilentStalkr]

Ok, guys I have just about completed a 6CM build and I was wondering what kind of suggestions you guys might give me for what loads worked well for you all? I realize there will be a lot of variables here but I am looking for a good starting point.
I was thinking of doing some load development and starting at 40 grains of powder and will be using H4350 for now. Do you guys think that this is a good starting point? Any help would be most appreciated.

 

[Gray]

6mm Creedmoor or 6mm Competition Match?

 

[Seandradamus]

Judging from your suggested starting point I'm guessing 6creed.
If so start at 41 go to 42.2 or stop when you hit 3100 fps.
My 26" gets that at 41.9 of h4350 it's a consistant .3 moa

 

[tigerfan_9]

hey look a whole thread for this.....

http://www.snipershide.com/shooting/snipers-hide-reloading-depot/103774-**6-creedmoor**.html

 

[SilentStalkr]

Yes, it is a 6 Creed. Thanks Tigerfan, that looks like a good start.

 

[mkollman74]

Judging from your suggested starting point I'm guessing 6creed.
If so start at 41 go to 42.2 or stop when you hit 3100 fps.
My 26" gets that at 41.9 of h4350 it's a consistant .3 moa

This with 105 hybrids...

 

[Seandradamus]

This with 105 hybrids...

Yes sir all day

 

[Backspace]

42 grains of H4350 is what I shoot with a 105 hybrid on top. Seems to be the go to load +/- a .1 grain or so.

 

[JGorski]

In my 2nd Creedmoor(26") Im getting just over 3100 with 41.8grs Hybrid 100V, SD as low as 7. Hybrids & VLDs. Same speed with 41.9grs H4350.