6mm competition match

[1moaoff]

Norma cases formed and neck turned
Federal primer
H1000 46.6 grains
Berger 105 hybrid (shoots almost anything great though)

30 degrees Fahrenheit
3042 avg
Sd 8
Es was 17 I think

 

[DRAM40A1]

That's a pretty tame load for that beast. I think my fireform load was 47.5 with a 105 AMAX. I have an old Savage stagger feed with a Bartlein heavy varmint by Dave Bruno. It has the factory plastic pos stock and sits in the closet. I need to get it in a proper stock and shoot it!

 

[Kimber.204]

I used my 6mm Comp Match last year for the local NRA High Power matches.

I did most of my fireforming with RL26, because I was just trying to use it up.....it's sooooo dirty.
All of this data is from a Krieger Medium Palma 1:7 twist - finished at 28in long. I believe that Dave Bruno cut the chamber with the 105gr Hybrid reamer. This leaves the 115gr DTAC's kissing the lands. I would like to seat the DTAC's out further, but with the accuracy that I'm getting I don't know why I would need to change.

RL26 Fire Form Loads
Hornady 105gr BTHP - HBN Coated
RL26
44.0gr
Win Large Rifle
2950fps
Very Dirty, lots of shots off call after 100 - 150 rounds. After cleaning group size returns.

H1000 Fire Form Loads
Hornady 105gr BTHP - HNB Coated
H1000
46.0gr
Win Large Rifle
Velocity ???
Sub MOA load.
Practiced 200 yard standing and sitting load.

H1000 Short Line Loads
Hornady 105gr BTHP - HBN Coated
H1000
48.8gr
Win Large Rifle
3150fps

H1000 Long Line Loads
DTAC 115gr RBT - HBN Coated
H1000
48.8gr
Win Large Rifle
3050fps
Slightly compressed. Good accuracy, good SD's.

Ramshot Short Line Loads
Sierra 95gr SMK - HBN Coated
Ramshot Magnum
46.4gr
Fed GM210M
3050fps
Very light recoil great for 200yd standing and sitting. Sub MOA 10shot groups.

Ramshot Long Line Loads
DTAC 115gr RBT - HBN Coated
Ramshot Magnum
49.9gr
Fed GM210M
3080fps
Can easily be pushed faster, but this load is single digit SD's for me. I was using the powder measure on my Dillon 550 and still getting these low SD's. Sub MOA 10 shot groups.

Of course, please work up to any posted loads as they may not be safe in your rifle.
Good Luck.
Ross