6mm creedmoor in new rpr

[p-nut]

I need some load data for hornady 103 gr. ELD-X bullets. The powders I have to use are H-4350, RL-16,17, and 19. I been running some 105gr. amax bullets with H-4350 then I guess hornady doesn't make that bullet anymore. thanks p-nut

 

[dryfire]

http://www.hornady.com/assets/files/reloading-manual-data/6mm-Creedmoor-103gr-ELD-X.pdf


Sent from my iPad using Tapatalk

 

[Possumpete]

Can't help you there but tagging in,I recently picked up on of these and its a hammer with 46.5 grains reloader 26 and Berger 105 hybrids.

 

[myates3]

Here is a group with my RPR and 108gr factory ELD-M ammo running at 3001fps

 

[p-nut]

that' what I been waiting to see for several days on my post. Way to go myates3. Was it done in a bolt gun or AR. Also what powder are you running with the 108 gr eldm bullet. I switched over to the 103 gr ELD-x bullet. thanks P-nut

 

[lash]

He was using Hornady factory loads.

 

[trappedinny]

If you're interested in the 108 ELD-M's, I found similar luck as myates with a handload.

Hornady Brass
CCI 200 Primers
41.5 H100V
2.78 OAL
1 in 8 twist bolt

 

[shootist2004]

I need some load data for hornady 103 gr. ELD-X bullets. The powders I have to use are H-4350, RL-16,17, and 19. I been running some 105gr. amax bullets with H-4350 then I guess hornady doesn't make that bullet anymore. thanks p-nut

looking at the hornady website shows they still make the A max..................