Yes, i posted the MagnetoSpeed pic in the other thread. Ran them to 3003 FPS but settled on 2910 FPS. Just loaded up 3 charge weights. All shot sub .5 moa at 100. Settled on the lowest SD ES and took that load to a mile.
That bullet will run at 3k FPS all day long from a 26 inch (no pressure signs in my chamber w the added FB). Waiting on the AMP pilot to come available before i settle on loads.
It’s done it’s finally complete! Thanks to Garret Maine Preece he knocked it out of the park and fast. 7mm Max Sherman can’t wait to get this brass fire formed so I can get on to my hot loads.
-AG Adjustable Hunter
-Remington 700 LA magnum
-Triggertech Special Trigger
-Hawkins BDL Bottom Metal
-Proof Reasearch sendero .284, 26”, 1:8
-Hardy Titanium Brake
-Talley Lightweight Rings
-Swarovski X5i 5-25-56
-ADG 7max brass
-58.5gr. of RL-23
-Berger 175 elite hunter
-2790-2800fps
-90rds dow the pipe still fire forming brass
-Stuff bolt lift hopefully that goes away after forming the brass.
-1 hole groups at 100yd and clover leaf 200yd Groups so far.
Thinking of going with the 169gr or 177gr Hammer hunters! But don’t wonna give up the accuracy.
Finished forming 100 pieces of brass with the Berger 175’s, moved on to the Berger 195 with n570. Great accuracy at 2920fps just like with the Berger 175’s over rl-23, but I tell you what that n570 gets the barrel hot quick.
Finished forming 100 pieces of brass with the Berger 175’s, moved on to the Berger 195 with n570. Great accuracy at 2920fps just like with the Berger 175’s over rl-23, but I tell you what that n570 gets the barrel hot quick.