Gunsmithing 700magnum extractor
- Thread starter Jim the Plumber
- Start date
Re: 700magnum extractor
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Dave Tooley</div><div class="ubbcode-body">Brownells, Remington or www.gunpartscorp.com </div></div>
I have tried all three places. none have the non riveted magnum extractor. Will a riveted style work in a newer bolt with out the rivet installed?
Thanks
Jim
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Dave Tooley</div><div class="ubbcode-body">Brownells, Remington or www.gunpartscorp.com </div></div>
I have tried all three places. none have the non riveted magnum extractor. Will a riveted style work in a newer bolt with out the rivet installed?
Thanks
Jim
Re: 700magnum extractor
No it will not work. Try Numrich, my not have spelled that right, but do a google search you should be able to come up with it.
No it will not work. Try Numrich, my not have spelled that right, but do a google search you should be able to come up with it.
Re: 700magnum extractor
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Jim the Plumber</div><div class="ubbcode-body"><div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Dave Tooley</div><div class="ubbcode-body">Brownells, Remington or www.gunpartscorp.com </div></div>
I have tried all three places. none have the non riveted magnum extractor. Will a riveted style work in a newer bolt with out the rivet installed?
Thanks
Jim </div></div>
Worst case its just a hole and a little peening.
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Jim the Plumber</div><div class="ubbcode-body"><div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Dave Tooley</div><div class="ubbcode-body">Brownells, Remington or www.gunpartscorp.com </div></div>
I have tried all three places. none have the non riveted magnum extractor. Will a riveted style work in a newer bolt with out the rivet installed?
Thanks
Jim </div></div>
Worst case its just a hole and a little peening.
Re: 700magnum extractor
To get this stright in my head you have a newer model 700 magnum that does NOT have the extractor that uses a rivet? I ask because I have a new 700 magnum that does use the rivet and everywhere I've searched they do not list an extractor without the rivet. Just want to make sure I'm searching for the right thing.
To get this stright in my head you have a newer model 700 magnum that does NOT have the extractor that uses a rivet? I ask because I have a new 700 magnum that does use the rivet and everywhere I've searched they do not list an extractor without the rivet. Just want to make sure I'm searching for the right thing.
Re: 700magnum extractor
These are all current production bolts:
If you look closely, you will not see the cuts for the "feet" of the non-riveted extractor do not exist as the wall of the bolt nose is too small.
The magnum bolts use a riveted extractor.
These are all current production bolts:
If you look closely, you will not see the cuts for the "feet" of the non-riveted extractor do not exist as the wall of the bolt nose is too small.
The magnum bolts use a riveted extractor.
Re: 700magnum extractor
That's what I was thinking 2156SMK, but I wasn't 100% sure. Thanks, I learned something today. So why are you looking for a non-riveted extractor Jim?
That's what I was thinking 2156SMK, but I wasn't 100% sure. Thanks, I learned something today. So why are you looking for a non-riveted extractor Jim?
Similar threads
