I shoot smaller calibers in my .30 rifle can with no problem. So my question is does shooting a 9mm through a ..45 can work without any issues? Osprey and TiRant cans.
Suppressors 9mm in a .45 can?
- Thread starter chooter
- Start date
I use an Osprey 45 on a 9mm. probably 90% 9mm and 10% .45. never had an issue. sound reduction is hearing safe running 147g 9mm. What are your specific concerns? I purposely purchased the 45 can even when all I had at the time was a 9mm so that I would have the flexibility to transition to a .45 in the future. Glad I did.
I don’t own any .45 threaded pistols but shoot a lot of 9mm through my Octane 45.
I personally like having the option and modularity. So .45 can for 9mm and .30 cal can for .223 is how I roll.
I personally like having the option and modularity. So .45 can for 9mm and .30 cal can for .223 is how I roll.
Function has been flawless although it gets dirty quicker (expected anytime you use a supressor). I didn't have to change any recoil springs in the handguns. I do have a neilsen (booster) in the osprey 45 even though I am shooting a Beretta which doesn't have the lock tilt barrel design and supposedly doesn't require a booster. All in all, it has functioned perfectly well and I am quite happy I purchased a Osprey 45 instead of a Osprey 9. The biggest drawback is changing the booster out when I want to swap from the Beretta 9mm to my HK45 due to the thread patterns being different between my two handguns. 9mm is 1/2x28 and the HK is a 16x1 LH.
I would have gone for the osprey 45 except for I found a really good promotional price on the 9mm model right before the 41F rush so I went with it while I easily could and the getting was good.
Short of getting out a meter I dont think youll have any concerns in running a smaller caliber through a larger.
Short of getting out a meter I dont think youll have any concerns in running a smaller caliber through a larger.
I’ve got an Osprey 45 and I’ve never put mine on a 45 yet. That said it’s ran perfect on my 9mm pistols that I have threaded barrels for. Just get the right booster for your pistol and you’ll be good to go.
If I had it to do over I would have gotten a round can instead of the Osprey. Not that it doesn’t work but the stock sights on most my pistols don’t clear on the Osprey even with the offset. Plus I like the round look better on rifles for a pistol caliber carbine.
If I had it to do over I would have gotten a round can instead of the Osprey. Not that it doesn’t work but the stock sights on most my pistols don’t clear on the Osprey even with the offset. Plus I like the round look better on rifles for a pistol caliber carbine.
The Osprey looks great on pistols and the Kriss Vector. Everything else Octane 45 works better on.
My Osprey .45 goes on all my 9mm and .45 ACP pistols, works fine. Bought a Rugged Obsidian in .45ACP (In NFA Jail) to do the same thing. Looking back, I wouldn't buy a 9mm can, too limiting.
Probably 3k+ 9mm thorugh my TiRant 45--no issues and pretty good suppression. I run it on 9mm and 45 pistols and carbines. Just be sure you use the fixed barrel spacer if on a carbine; it5 will still work but told it can be tough on the can.
ZY
ZY
