a little modification to my manners t5-a

[565fitter]

I almost didn't buy this stock because its not really made for lefties, but I decided I really wanted it and was going to try it out.

it showed up at my door a couple of weeks ago. so I got at reshaping the grip and adding front and rear rails. the front rail was easy I ordered the seekins precision srs 4" which required me to drill a new hole and open up the inside of the stock so I could use the factory hardware from the sling posts. the rear was a little harder. the insert from the rear sling stud was used to screw down the seekins srs 2" and I had to drill a new hole and add another threaded insert for the front mounting hole. I used jb weld to lock the insert into the stock.

the paint job is temporary until the bottom metal gets in and I send it all off to get cerakoted.

 

[Supergyro]

It looks like factory. Good job. What are your cerakote colors going to be?

 

[565fitter]

All the parts are going to be coyote tan and the stock I'm still trying to decide between multicam and kryptek, but I'm leaning torwards kryptek

 

[565fitter]

added another coat just to match the action and barrel when they get back until deer season is over. this is my .308 i just put it in there to see what it would look like when the 6.5 gets here.