Rifle Scopes Accuracy of adjustments on Vortex PST

[JustG]

Has everyone been happy with the accuracy of their adjusts on their viper pst's? A little worried I will not get precise corrections.

Thanks

 

[Donr13]

mine seems to work just fine and i have shot out past 800 yards with it accurately, there is a small margin of error i am sure with most scopes. although my s&b pmII has dead nuts on adjustments so far.

 

[JustG]

I should see the accuracy by placing a known target size and see if the clicks measure the size of the target, yes?

 

[JustG]

And what would be the best way to set this up?

 

[LRJammer]

Box drill on mine shoots dead on.

 

[medic738]

tagged for info

 

[Opticsspecialist]

so far mine have been repeatable and performed very well. I currently have a 4-16 on a 16 inch AR10 and i've used the same scope for load development on a couple of rifles.

 

[JustG]

Although repeatability is important to me, I want to know if I dial 10 clicks, that I'm not get 9 or 11. Though I use my mil reticle as a "ballistic" reticle.

 

[missed]

I have not had any issues with my 6-24's I had done the box test on graph paper at 100 yards and 5 moa was 5 moa, both vertically and horizontally the impacts were as expected.

Sent from my XT1080 using Tapatalk

 

[BCP]

Although repeatability is important to me, I want to know if I dial 10 clicks, that I'm not get 9 or 11. Though I use my mil reticle as a "ballistic" reticle.

When I was shooting my old PST at 600 I think it was off by about 5% if I had to put a number to it. Like 1/2MOA for 13MOA of clicks. It always returned to zero though. That's why good shooters always tell people to work out their data on the range rather than with a calculator.

 

[Jointshooters]

Has everyone been happy with the accuracy of their adjusts on their viper pst's? A little worried I will not get precise corrections.

Why are you worried, personal experience or something you read on the interwebs?