Action wrench for Sako TRG 22 and 42 (order list)

[Massoud]

Gents,
There's been some talk lately of an action wrench for the TRG.

KRG will be doing one. It will be the internal type that engages the raceways of the action. Ours will engage the raceways for the full length of the action, to minimize localized stress. The end will be a 19mm / 3/4" hexagon for a socket wrench. It will fit both TRG-22 and 42.

Price: 150-250 not yet determined (or about 5 dollars less than one OEM action screw, just kidding Sako)

Timeline: To be shipped before Christmas barring any disasters.

We would like to take pre-orders so we can get an idea of what the demand really is out there. We are not asking for money at this time.

If you are interested, please send an email to info at krg-ops.com (replace "at" with @) with the subject line "Action wrench order list" You can post on here too but it will help us track better if you email as well.

Thanks guys,
Justin

 

[Massoud]

Re: Action wrench for Sako TRG 22 and 42 (order list)

PM's and emails replied. We'll keep this up for a couple days then start cutting. Thanks guys,
Justin

 

[stefan73]

Re: Action wrench for Sako TRG 22 and 42 (order list)

I'm in!!!!
Email sent!

Thanks guys!

 

[Massoud]

Re: Action wrench for Sako TRG 22 and 42 (order list)

Thanks Stefan73!

If there is interest, we may do a custom barrel bushing that goes into a Wheeler barrel vice and fits the taper of the TRG barrel and sell it as a kit. We haven't had real great luck with those wooden blocks grabbing tapered barrels.

Justin