AI AT with 1.5mount/rings

[LA260]

Anyone has a pic of AI AT with 1.5" mount or rings? Thanks

 

[Wyfox]

Go to Milehighs home page and the AT with clip on night vision has 1.5" mount
https://www.milehighshooting.com/

 

[LA260]

Thanks. Wow that looks pretty high even with a 56mm scope. I orferef a 1.5" mount but now I'm having doubts about it.

 

[Vargmat]

I run 1,1" rings and a 5-25x56 scope and there is plenty of room between the objective and barrel. Allthough, I dont have any plans of ever running a NV.

 

[LA260]

I tried with 1" rings and while it works the cheekpiece is all the way down. I wanted a zero cant badger mount and it only comes with in 1.5" but I didnt think it would look THAT high

 

[Vargmat]

Yes, I run the cheekpiece in the lowest setting too. I dont see a problem with that.
However I have tried the AIAT chassis with lower than 1" rings and that is a no go, since then the cheekpiece gets in the way.

 

[Dthomas3523]

Here is a spuhr 1.18 with an AMG (50mm).

Also, any reason other than aesthetics you’re concerned with the height?

 

[Wyfox]

Thanks. Wow that looks pretty high even with a 56mm scope. I orferef a 1.5" mount but now I'm having doubts about it.

That rifle has a 3-12x50, the 1.5" height is needed to align with the NV properly. Also note that rifle has the factory higher pic rail, you can get a lower profile rail.

 

[LA260]

Here is a spuhr 1.18 with an AMG (50mm).

Also, any reason other than aesthetics you’re concerned with the height?

View attachment 6909069

Nope only aesthetics. I feel it just looks odd when the scope is too high without NV stuff in front of it.

That rifle has a 3-12x50, the 1.5" height is needed to align with the NV properly. Also note that rifle has the factory higher pic rail, you can get a lower profile rail.

Yeah i understand why the scope has to be high to align with NV. I doubt I'll ever put NV so i probably should ve gone with a lower mount. Mount should be here next week so we'll see how it will look.
Thanks for letting me know that a lower rail is avail i wasn't aware if it. Do you know how much lower it is from highee rail?

 

[Wyfox]

https://www.milehighshooting.com/otm-180-otm-20moa-rail/

 

[LA260]

Now that I'm comparing my AT to pics online it looks like mine already came with low/lower rail. It has a part# 26980 on it that doesnt exist per eurooptic but at least it says 20moa on it.