I got an AI AX chassis in a trade. I have no instructions and a search online came up with nada. Does anyone have a .pdf or video of the installation on this chassis? I also am trying to figure out how to swap the skin. There are so many machine screws on this thing is tough to tell what does what and even when I removed all of what I thought would remove the grip skin, I still cant get it off. Also the rear action screw cant come all the way out with the skin still installed. Any help would be greatly appreciated.
Gunsmithing AI AX Chassis Install and Skin Swap
- Thread starter 03psd
- Start date
For the pistol grip section, there are two screws that hold the black back portion of the pistol grip on, those must be removed.
Once the skins are off, the two action screws should be able to be completely removed.
If the three long screws and the two back portion screws are out and it still won't come off, you may just need to do some detective work to see whats going on.
Two screws hold the forearm on
Three screws hold the two pistol grip halves together
Two screws hold the back portion of the grip to the two halves
Three screws hold the butt assembly halves together
Eight (or is it ten?) screws hold the floating rail on the front of the chassis
Once the skins are off, the two action screws should be able to be completely removed.
If the three long screws and the two back portion screws are out and it still won't come off, you may just need to do some detective work to see whats going on.
Two screws hold the forearm on
Three screws hold the two pistol grip halves together
Two screws hold the back portion of the grip to the two halves
Three screws hold the butt assembly halves together
Eight (or is it ten?) screws hold the floating rail on the front of the chassis
