AICS technical question

M24_SWS

Sergeant
Full Member
Minuteman
Feb 11, 2010
522
0
39
Somersworth, NH
Its my fault for not considering this first.

I bought a AICS 2.0 left hand short action green stock.

question is: will the aics stock have any issues in its factory form with a timney trigger where the trigger shoe is .4 inches wide?

thank you
 

300sniper

Gunny Sergeant
Full Member
Minuteman
Jan 17, 2005
3,438
17
Greenwood, Ca
Re: AICS technical question

the trigger shoe is fine but you will want to sand/file/grind a bit off the pin that moves side to side on the trigger when the safety is worked.

edit: i missed the left hand part but i would assume the lh timney triggers are built and function the same way as the rh models.
 

Elxx

Sergeant
Full Member
Minuteman
Nov 23, 2008
208
0
Tucson AZ
Re: AICS technical question

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: M24SWS</div><div class="ubbcode-body">Its my fault for not considering this first.

I bought a AICS 2.0 left hand short action green stock.

question is: will the aics stock have any issues in its factory form with a timney trigger where the trigger shoe is .4 inches wide?

thank you </div></div>

Where did you get the lefty AICS?