Almost Finished!!! Warner Tool Build

[Tactical30]

I recently sent a bunch of parts to Alan and Dan at Warner Tool to have a build done by them at the end of March. I got an email from them couple weeks ago and its at Birdsong getting the Coating finished (been at Birdsong for almost 3months).

Should have this build back in the next month. I hope!
CANT WAIT TO RECIEVE THIS COMPLETED!
Im so excited to get this build back from them!!

<span style="text-decoration: underline">Here are the specs:</span>

<span style="font-weight: bold">.300 Winchester Magnum</span>

Rem.700 Long Action

McMillan ADJ A-5 Stock- Desert Camo, Sni-Fill, RH, Spacer System, 1 Front Stud, 2 Rear Stud, Thumbwheel C/P.

Bartlien Barrel - #7 MTU - 26" Length - 1-10 Twist

Inlet and Pillar Bed

Surgeon Rifles KMW Bolt Knob

Badger Ordnance FTE Brake

CG Jackson 2-Stage Trigger

Warner Tool Recoil Lug

Badger Ordnance M5 Bottom Metal w/ AI Mags

Accushot 3.35" 1913 Pic. Bipod Rail

Accushot Atlas Bipod

Action: Trued; re-cut action face and lugs, grind lap and polish bolt lugs, re-cut bolt face.

Open scope holes to 8-40

All metal Birdsong Coated in Tan-T

Badger USMC DMR Rings (1.031")

NightForce NXS 3.5-15x50 NP-R1 Reticle

I also am getting some reloading components ready for this thing. So far I got some H-1000 and Berger 210gr. and Hornady 208gr. A-MAX's along with some Winchester Brass and Federal Primers.

 

[Jeffvn]

Re: Almost Finished!!! Warner Tool Build

I have two of Alan and Dan's work. Truely amazing worksmanship and they are both hammers. If you got the sizing dies too, you'll be stunned at how well they work.

If you talk to Dan or Alan again, tell them Jeff in Vegas said Hey!

JeffVN