Not sure where to put this one, if I remember correctly the original thread talking about this was here, so here is the info, mods please sticky and or move if need be.
Link to ALS recall fix info
BOLT RECALL
If you own an ALS 50 BMG Upper Conversion purchased and delivered before July 2009, you are entitled to a bolt modification. ALS has identified a possible safety issue with some bolts manufactured before July 2009 which may cause the upper to fire out of battery. We are requesting all current owners of the ALS 50 BMG Upper Conversion built before July 2009 to send us their bolt and modified Jard hammer (trigger is not required). We will then retrofit the bolt and return it to you free of charge. Do not fire your ALS Upper Conversion until the modification is completed.
To participate in the bolt modification we will need you to:
1. Complete the repair form below and print page
2. Send your bolt, hammer and repair form to:
Advanced Longrange Systems, LLC
3554 East Antelope Rd.
Eagle Point, OR 97524
Please know that we are doing our best to resolve this issue in a timely manner. Thank you for your patience.
Repair Form
Name:
Date of Purchase:
Address (No PO Boxes):
City:
State:
Zip:
Phone :
Fax:
E-mail Address:
:: Preferably, ship this form and bolt inside a plastic bag. Then, pack your bolt and hammer securely to prevent damage in shipping.
:: Ship your bolt and hammer by either UPS or Parcel Post. ALS is not responsible for damage or loss
during shipment, so you may elect to purchase insurance from your carrier
ADVANCED LONG-RANGE SYSTEMS, LLC:
3554 E. Antelope Rd.
Eagle Point, OR 97524
(541) 826-8232
Web site: www.50bmg.net
E-mail: [email protected]
Link to ALS recall fix info
BOLT RECALL
If you own an ALS 50 BMG Upper Conversion purchased and delivered before July 2009, you are entitled to a bolt modification. ALS has identified a possible safety issue with some bolts manufactured before July 2009 which may cause the upper to fire out of battery. We are requesting all current owners of the ALS 50 BMG Upper Conversion built before July 2009 to send us their bolt and modified Jard hammer (trigger is not required). We will then retrofit the bolt and return it to you free of charge. Do not fire your ALS Upper Conversion until the modification is completed.
To participate in the bolt modification we will need you to:
1. Complete the repair form below and print page
2. Send your bolt, hammer and repair form to:
Advanced Longrange Systems, LLC
3554 East Antelope Rd.
Eagle Point, OR 97524
Please know that we are doing our best to resolve this issue in a timely manner. Thank you for your patience.
Repair Form
Name:
Date of Purchase:
Address (No PO Boxes):
City:
State:
Zip:
Phone :
Fax:
E-mail Address:
:: Preferably, ship this form and bolt inside a plastic bag. Then, pack your bolt and hammer securely to prevent damage in shipping.
:: Ship your bolt and hammer by either UPS or Parcel Post. ALS is not responsible for damage or loss
during shipment, so you may elect to purchase insurance from your carrier
ADVANCED LONG-RANGE SYSTEMS, LLC:
3554 E. Antelope Rd.
Eagle Point, OR 97524
(541) 826-8232
Web site: www.50bmg.net
E-mail: [email protected]
