Anvil 30 adapter

anginaprinzmetal

Sergeant of the Hide
Full Member
Minuteman
Jun 13, 2014
309
92
Is it possible to adapt a RRS Anvil 30 to a 100 mm tripd head, something like a Crux Ordnance ? If so what would be the adapter needed ? Thx
 

drwood96

Samsonite! I was way off!
Supporter
Full Member
Minuteman
Supporter+
  • Sep 16, 2017
    819
    473
    Tuscaloosa, AL
    rolltide.com
    Yes, if you have a 100m plate/head with a 3/8-16 mount. It would be best if the plate has additional set screw has the Anvil provision to prevent the head from rotating. Just backorder from the site. You’ll want the Anvil with no adapter. If you follow them on social media then they offer tease upcoming batches and that the best time to order.
     
    • Like
    Reactions: jwood1284

    mlpkhl

    Sergeant of the Hide
    Full Member
    Minuteman
    May 1, 2013
    469
    99
    Salt Lake City, Ut
    @anginaprinzmetal
    With the RRS series 4 tripods which we have our 100m leveling bases, we have a adapter to shrink it down to the 3 series 75mm leveling bases. It is called a TA-4-AA3, https://www.reallyrightstuff.com/ta-4-aa3

    Then you could use the Anvil-30 with the 3 series adapter. I don’t know if it will fit in other companies tripods.

    Or you could direct thread the 3 series Anvil-30 platform adapter and find 3 set screws since the adapter is tapped 3 times for any other uses people can find. This is the solution the previous post said which is a spot on solution people have used.
     
    • Like
    Reactions: jwood1284