There are not a lot of choices out there for a 1 piece 1 inch tube mount for a AR-15. I have ordered a Nikon m-223 mount. Is this a good mount or not?
Rifle Scopes AR 1 inch scope mount
- Thread starter Nosler243Shooter
- Start date
Re: AR 1 inch scope mount
In a true QD setup, the ADM Recon works as well, but it is about twice the cost of the other two mounts
In a true QD setup, the ADM Recon works as well, but it is about twice the cost of the other two mounts
Re: AR 1 inch scope mount
warne makes them for nikon, they work well, burris has the arpepr mount that isn't bad, personally i like the 20moa in the nikon.
warne makes them for nikon, they work well, burris has the arpepr mount that isn't bad, personally i like the 20moa in the nikon.
Re: AR 1 inch scope mount
I like (and use) the Freedom Reaper from DNZ:
DNZ Freedom Reaper 1"
DNZ also makes a railed ring top:
Railed ring top
There's also a railed ring that surrounds the main tube, useful for mini red dot sights, lights or lasers:
DNZ 1" ring mount
Mark H.
I like (and use) the Freedom Reaper from DNZ:
DNZ Freedom Reaper 1"
DNZ also makes a railed ring top:
Railed ring top
There's also a railed ring that surrounds the main tube, useful for mini red dot sights, lights or lasers:
DNZ 1" ring mount
Mark H.
Re: AR 1 inch scope mount
LaRue also makes their mounts in a 1" version that you can upgrade to a 30mm by swapping out the rings.
LaRue also makes their mounts in a 1" version that you can upgrade to a 30mm by swapping out the rings.
Re: AR 1 inch scope mount
...and don't forget about the Armalite mounts. Sorry, I have no experience with the Nikon.
...and don't forget about the Armalite mounts. Sorry, I have no experience with the Nikon.
Re: AR 1 inch scope mount
Get 30mm rings and 30mm -> 1" reducers, that way if you get a new scope (30mm) later on, you wont have to buy new mounts. Scope ring reducers are only $15.00 at GG&G, and just a little bit nmore at LaRue. I have a set on my AR mounted Leupold Vari-X 3 3.5-10, and there has been zero problems.
Regards,
Rick
http://www.gggaz.com/30mm-to-1-inch-scope-ring-reducer.html
Get 30mm rings and 30mm -> 1" reducers, that way if you get a new scope (30mm) later on, you wont have to buy new mounts. Scope ring reducers are only $15.00 at GG&G, and just a little bit nmore at LaRue. I have a set on my AR mounted Leupold Vari-X 3 3.5-10, and there has been zero problems.
Regards,
Rick
http://www.gggaz.com/30mm-to-1-inch-scope-ring-reducer.html
Re: AR 1 inch scope mount
I use a Nikon M223 mount on my heavy barrel Armalite and it works great, and the built in 20 moa cant is nice as well.
I had to exchange the first one I got because some of the threads were mangled out of the package, but the next one I got has been perfect. No zero shift or anything of that nature. I can't speak to ring marks since I have yet to remove the scope from it.
One thing to consider is it is not a QD mount. It does take a little bit of time to move between rifles. If this is a concern you might want to look elsewhere.
I use a Nikon M223 mount on my heavy barrel Armalite and it works great, and the built in 20 moa cant is nice as well.
I had to exchange the first one I got because some of the threads were mangled out of the package, but the next one I got has been perfect. No zero shift or anything of that nature. I can't speak to ring marks since I have yet to remove the scope from it.
One thing to consider is it is not a QD mount. It does take a little bit of time to move between rifles. If this is a concern you might want to look elsewhere.
Re: AR 1 inch scope mount
Leupold also has their new IMS mounts available in 1":
http://www.opticsplanet.net/leupold-mark-2-ims-ar-riflescope-rings-mount.html
http://www.opticsplanet.net/leupold-integral-ring-insert-mark-4-ims.html
George P.
Leupold also has their new IMS mounts available in 1":
http://www.opticsplanet.net/leupold-mark-2-ims-ar-riflescope-rings-mount.html
http://www.opticsplanet.net/leupold-integral-ring-insert-mark-4-ims.html
George P.
Re: AR 1 inch scope mount
I have a LaRue LT 104 and a Burris PEPR. The PEPR is great for the money but it is nowhere near the quality of the LaRue. PEPR mounts need to be lapped to keep from putting ring scratches on your scope. LaRue's need no lapping like any good quality rings.
I have a LaRue LT 104 and a Burris PEPR. The PEPR is great for the money but it is nowhere near the quality of the LaRue. PEPR mounts need to be lapped to keep from putting ring scratches on your scope. LaRue's need no lapping like any good quality rings.
Re: AR 1 inch scope mount
Thanks for the replies. I didn't know there were so many options. I decided to keep the Nikon for a future rifle and ordered a American Defense Recon mount for my current setup.
Thanks for the replies. I didn't know there were so many options. I decided to keep the Nikon for a future rifle and ordered a American Defense Recon mount for my current setup.
Similar threads
