I was at the Apache Jct store this afternoon and they got a small shipment in of powder. They haven't even unboxed them so I don't know which kind. They were pretty much out of ammo and guns. I talked with the guy at the counter about primers and he said they were on a 14 week waitlist and then last week they got a call and are now on a 2 year waitlist, lol. He said all primers are going to gun manufactures and anything extra will go to the big box stores.
Reloading Equipment Arizona Reloading Buy - Sell - Trade Thread
- Thread starter RobbW
- Start date
- Status
Thank you, @Dalmore!
I've got 14k Winchester large pistol primers and 8# of 50 BMG powder (Thunderbird T-860) available. Also have some 9mm, .308 and other misc ammo in the connex.
I could use Retumbo or H-1000, Fed 215(M) and Fed 210(M), Accurate No. 5
I'm at Gunsite (Prescott), but will be passing along I-40 to Las Vegas and back next week
I could use Retumbo or H-1000, Fed 215(M) and Fed 210(M), Accurate No. 5
I'm at Gunsite (Prescott), but will be passing along I-40 to Las Vegas and back next week
Ive got an order placed for N570 and N165, this was a backup for H1000 and H4350 that I couldnt find. Well, I just bought 8lbers of each, so no longer need the N570 and N165.
Before I cancel the order, any AZ guys need 3# of N570 and 4# of N165? Id sell for my cost.
Before I cancel the order, any AZ guys need 3# of N570 and 4# of N165? Id sell for my cost.
I have several hundred rounds of once-fired Hornaday 6.5CM brass and once-fired Federal .308 brass in North Scottsdale if anyone is interested.
It seems the going rate is $0.40 - 0.50 per round?
I also have a new size 46 right-hand Creedmoor leather shooting jacket if interested. Would really rather not ship that!
It seems the going rate is $0.40 - 0.50 per round?
I also have a new size 46 right-hand Creedmoor leather shooting jacket if interested. Would really rather not ship that!
PM sent on the 7.5
North Phoenix checking in. I'm getting out of 308. I have 1x fired Federal brass, 1 pound of 4064, 400 168gr Hornady match projectiles, RCBS dies, CTS trimmer, LE Wilson case gauge, and probably a few other items im forgetting. I'm also parting out a 308 AR and have a Criterion 16" rlgs barrel with about 350 rounds through it with a SLR adjustable gas block and gas tube. I'm looking for Hornady 6.5 Creedmoor brass, LR primers, and 6.5 projectiles. Send me a pm if interested.
Edit: the Criterion barrel is gone!
Edit: the Criterion barrel is gone!
Last edited:
Phoenix--Have 4+ pounds of Rel.19 to trade for TWO pounds of Rel.17, which I would REALLY like to try in my 'new' 6XC rifle.. Will drive up to two hours (one way) to effect this trade.
...or...
1K of CCI 41 primers (small rifle, designed for 5.56X45 military ammo but works PERFECTLY in my 6Creed). That's $100 retail value of primers for two pounds of powder.. PM me if interested.
Also, more than 470 Sierra MatchKing 110s.. Replacement cost seems to be around $235 or around $220 for my 470+.. Still want some Rel. 17.
...or...
1K of CCI 41 primers (small rifle, designed for 5.56X45 military ammo but works PERFECTLY in my 6Creed). That's $100 retail value of primers for two pounds of powder.. PM me if interested.
Also, more than 470 Sierra MatchKing 110s.. Replacement cost seems to be around $235 or around $220 for my 470+.. Still want some Rel. 17.
Last edited:
*** Updated - Now Swapped for what I needed Thanks ***
Last edited:
Traded
3K rRem 7 1/2
looking to trade for LPP
FED/CCI LRP
H4895
Varget
In Apache Junction
3K rRem 7 1/2
looking to trade for LPP
FED/CCI LRP
H4895
Varget
In Apache Junction
Last edited:
I am looking for new 300 Blackout Brass. Lapua or Nosler would be great to find. So if you find a big box you are not using... let me know.
Robb
Robb
Have the following:
1# IMR 4198
2.5# Ramshot Big Game
1# VVN160
6.5# Ramshot TAC
looking to trade for H4895 or LPP
1# IMR 4198
2.5# Ramshot Big Game
1# VVN160
6.5# Ramshot TAC
looking to trade for H4895 or LPP
Last edited:
updated list of needs for my stuff will trade what i have or will outright buy as well
Have the following:
1# of superformance
1k LPP
2# H4350
Looking for:
Varget
IMR 4895
RE15
SPP
SRP
CFE Pistol
Win 231
VIHT N-350
Have the following:
1# of superformance
1k LPP
2# H4350
Looking for:
Varget
IMR 4895
RE15
SPP
SRP
CFE Pistol
Win 231
VIHT N-350
Last edited:
Holler next time you're in Tucson Robb.... I have a bag of ~100 S&B once-fired 300BLK cases that you can have as a Thank You for starting this thread!
I’ll look forward to grabbing some lunch then and discuss loading. Be in March for sure. Maybe I’ll find some rl16 by then...
Robb
Last edited:
Hey Robb, I have RL16 to trade with you if you have LRP's to trade.
Last thing looking to trade 199 90gr 6mm eldx and 99 109gr berger long range hybrid target for some berger 105s
A big THANK YOU VERY MUCH to Jef-in-AZ and hereinaz for trading some Rel17 to me; I'll put it to good use.
FWIW, the two actual weights of powder were dead on or slightly over.
FWIW, the two actual weights of powder were dead on or slightly over.
I would have sold you some winchesters for cheaper than that. Lol.
a guy on armslist has some spp gouged to shit at 225 a box and 1050 for 5k and he has like 15k spp stocked up i hate people
Phoenix, but will drive for the right deal.
Added Feb. 12--1K of Federal GM205M small Rifle Match Primers. Bought the wrong thing and they're not returnable.
Still looking for Rel. 17.. Can always use CCI #41 SR primers.
Have to trade:
6mm Sierra 110g. MatchKing bullets, at least 310
6mm Nosler 105g. RDF 'Ultra-High Match Bullets, at least 190.
Vortex Strike Eagle Riflescope, 4-24X50 with EBR-5 MOA reticle, #SE-1627, a very good entry-level scope for LR shooting, in excellent condition
GONE/SOLD--6.5 Grendel dies: Lee 3-piece set (resize/decap/mouth expand, 'Easy-Adjust dead Length' bullet-seater, and Factory Crimp die) and Forster Ultra Micrometer Seater Die
6.5-284 dies, Forster Full-Length Sizing Dies and Ultra Micrometer Seater Die
6.5 Creedmoor dies: Forster Full-lenfth Sizing Die and Ultra Micrometer Seater Die, plus Lee Precision B7 collet-neck-sizer/decapper die
All in excellent condition.
Added Feb. 12--1K of Federal GM205M small Rifle Match Primers. Bought the wrong thing and they're not returnable.
Still looking for Rel. 17.. Can always use CCI #41 SR primers.
Have to trade:
6mm Sierra 110g. MatchKing bullets, at least 310
6mm Nosler 105g. RDF 'Ultra-High Match Bullets, at least 190.
Vortex Strike Eagle Riflescope, 4-24X50 with EBR-5 MOA reticle, #SE-1627, a very good entry-level scope for LR shooting, in excellent condition
GONE/SOLD--6.5 Grendel dies: Lee 3-piece set (resize/decap/mouth expand, 'Easy-Adjust dead Length' bullet-seater, and Factory Crimp die) and Forster Ultra Micrometer Seater Die
6.5-284 dies, Forster Full-Length Sizing Dies and Ultra Micrometer Seater Die
6.5 Creedmoor dies: Forster Full-lenfth Sizing Die and Ultra Micrometer Seater Die, plus Lee Precision B7 collet-neck-sizer/decapper die
All in excellent condition.
Last edited:
Anyone interested in trading 215M primers for BR4’s?
located in Gilbert.
located in Gilbert.
I have Winchester SSP. Looking for CCI 450. Mohave County.
Message sent....
What 6.5 PRC do you have? I have good supply of 9mm ammo and need 6.5 PRC brass.
If anybody wants to do a 1-for-1 trade, I'd like to trade 308 ammo, brass, dies, and CTS trimmer for the same in 300 Blackout. I have 180 rounds of gold medal match 175 SMK and 120 rounds of 185 Berger Juggernaut ammo and probably 300 or so pieces of once fired Federal brass from the same ammo. I also have a pound of IMR4064 I'd trade for a pound of something applicable to 300 Blackout. I'm in north Phoenix near Thunderbird High School.
Have:
Federal 100M small pistol primers
Wolf small rifle primer
CCI 450
Need
Berger 105 hybrids
Federal 100M small pistol primers
Wolf small rifle primer
CCI 450
Need
Berger 105 hybrids
And you are where?
Would u be willing to sell the 100ms or I have 109 hybrids
Trade only and 105s work better for me. Phx area
I have 250 105's (same lot), would trade for 450's. I'm in NE Mesa. (will be at 4Peaks match this morning)
In
Interested in 6.5 creedmore brass, you willing to ship. Primers also but not sure on the mailing part of that
In
Interested in 6.5 creedmore brass, you willing to ship. Prime
Anyone have any 6.5 Berger 140g projectiles for sale or trade? Let me know how much you want or what you may be looking to trade for.
Looking for 500 to 1000 of the same lot of Berger 105. Would be willing to trade for 2-300 of Hornady A tip 6mm 110 gr to give them a try.
I have the following powders available for sale. I am located in Yuma,AZ. I will not ship and if interested we can meet locally. Cash only.
*powder subject to local sale. Please PM if interested.
*powder subject to local sale. Please PM if interested.
Last edited:
Anyone have any 140 grain Berger VLD or hybrids to sell or trade? What do you have and how much/what do you want?
Hi guys-
In the Gold Canyon area until Tuesday night. I have (2) 8lb jugs of VV540 that I will trade for H4895 or Varget. Will sell for $325 each if you don’t have a trade. Also have 1K of cci 400srp to trade for cci BR2 lrp. Will not sell primers.
Cheers
In the Gold Canyon area until Tuesday night. I have (2) 8lb jugs of VV540 that I will trade for H4895 or Varget. Will sell for $325 each if you don’t have a trade. Also have 1K of cci 400srp to trade for cci BR2 lrp. Will not sell primers.
Cheers
Matt , I have either 500. Or 1000, I will have to look. Let me know what you would like to trade
What are you looking for? I have cash as well.
- Status
