What do you prefer? I am shooting to 1000 yards. Mainly paper. I do kind of have bad eyes, so should I maybe get the thicker one?
Rifle Scopes ATACR MOAR vs MOAR-T Reticle?
- Thread starter WEATHERBY460
- Start date
I have both my eyes still good not wearing glasses(knock on the wood) before atacr came out i had 7 nxs 5 npr1 thin ret. Sold 4nxs when atacr came out, this before moar-t came avail..i had 3 atacr all moar at first, i was loving the quick aquiz on thicker crosshair but im so used to aiming small mised small theory.. but i got used to it and i realized the thin and thick crosshair not going to make diff.. it will not elevate you skill.. about vision id stay what my eyes can focus better.MOAR is great not as thick.. moar-t is .060 its like R2 ret.. its very fine crosshair you might have a problem..people complain about thick ret overlaping target, well if thats the case think about guys who shooting FFP where ret grow bigger on higher magni. Yet they still shoot sub MOA..its the glass that matter the most with great tracking on every scope.
Shooting out to 1000 yards I shoot just as tight of groups with my ATACR standard MOAR as I did with my NP-R1 and NP-R2 reticles on my 5.5-22 NXS scopes. I find the thicker reticle is very nice for getting on target easier and more quickly.
I have found over the years after shooting many different brands, models, and magnifications of scopes, that I can hold the same tight groups out to 1000 yards even with thicker reticles and low magnification settings.
Bolt gun shooters are always amazed how I shoot groups just as tight as their groups at long distance with my GAP AR10 (.308) with a S&B PMII 3-12x. They all have much higher power scopes on their rifles compared to mine.
Don't get too hung up on having to have ultra thin reticles and high magnification scopes.
I have found over the years after shooting many different brands, models, and magnifications of scopes, that I can hold the same tight groups out to 1000 yards even with thicker reticles and low magnification settings.
Bolt gun shooters are always amazed how I shoot groups just as tight as their groups at long distance with my GAP AR10 (.308) with a S&B PMII 3-12x. They all have much higher power scopes on their rifles compared to mine.
Don't get too hung up on having to have ultra thin reticles and high magnification scopes.
I've got three ATACRs with MOAR reticle. At 0.140 MOA, the crosshairs are big enough - but not too big. I wouldn't have three if I was not crazy about the scope - and the reticle.
But, my personal ATACR #4 will have an MOART reticle. It will go on a Tubb 2000 paper puncher. I'm not saying I'll shoot better with the finer MOART reticle. But, I'd like to try!
But, my personal ATACR #4 will have an MOART reticle. It will go on a Tubb 2000 paper puncher. I'm not saying I'll shoot better with the finer MOART reticle. But, I'd like to try!
Similar threads
