Atlas Spikes - Part # BT37

Kasey

Kasey

Gunny Sergeant
Commercial Supporter
Full Member
Minuteman
Apr 3, 2003
1,489
878
www.accu-shot.com
#1
Okay we got the spikes, (our part number BT37 - Atlas Spike foot) from the shop while I was away at SHOT.

The Spike portion is Stainless Steel and it is mated to our standard Foot Insert so they will plug in and out of the Atlas.

I put a quarter besides them to give an idea of size, Spike is 1.45" long and the large OD is just under an inch, cost is 49.95.

We should have them up on our www in the next 48 hours.


[img:center]
ATLASSPIKES.jpg
[/img]
 
#9
Re: Atlas Spikes - Part # BT37

Although I can appreciate the intended purpose for these spikes, I'd really love to see you also market a steel pole about 5' long fitted so these would attach to one end. LOTS of uses for such a rig (LOL)!
 
#10
Re: Atlas Spikes - Part # BT37

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: cox380</div><div class="ubbcode-body">Would you recomend these spike style feet or the cleat style for shooting in grass and dirt? </div></div>

I would give these spikes a try. I have used my cleat feet in loose soil and wet grass and they don't do well in moist environments. They seem to fold up and skid.

I'm wanting a few sets of the spikes!
 
#16
Re: Atlas Spikes - Part # BT37

Thanks guys, we did a small run of these BT37 - Atlas Spikes and we are close to being sold out.

Regarding the group buy, that was made by a couple of other SH members, one being the manufacturer, and they did so with my blessings. And furthermore, as far as I'm concerned, they can continue to make their version of the Spike for the Atlas.

The irony, is our version was in line to be run (6 weeks into the 8 week wait) when theirs were shown and offered. And just for clarity and to make sure no one screams "copycat", our print is dated 2007. We have not shown this print around and fully believe the other manufacturer struck upon the concept on his own.
 
#23
Re: Atlas Spikes - Part # BT37

Just got my spikes for Atlas, great job Kasey. When you say spikes you don't mess around. Might check to see if you can ship these to Calif., Mass, Ny etc. They can't be legal to own
 
#26
Re: Atlas Spikes - Part # BT37

Very nice design. I have the Atlas claws, or I'd order a set of these in a heartbeat. Atlas continues to deliver great designs, innovations and quality.

Just remember to take them (or the claws) off before setting up on the hood of your department's new cruiser. ;-)

Cheers,

Sirhr

PS. No, I didn't make that mistake... yet.
 
You must log in or register to reply here.

Similar threads

buffalowinter
SOLD Glock 17/34 Longslide Custom IPSC 3 Gun Pistol TTI, ZA, Timney
Replies
2
Views
394
buffalowinter
buffalowinter
Bilb0
SOLD Updated: 2011 Custom Parts + Tools. Cheely, Brazos, Atlas etc. [Trade: $:Ammo]
Replies
5
Views
2K
Bilb0
Bilb0
pangris
Battle Arms Development barrels and customer service – Caveat Emptor
Replies
19
Views
2K
pangris
pangris
F
2024 Legion Memorial Run and Gun, Honoring the Fallen as a Family
Replies
9
Views
704
FatBoy
F
gr8fuldoug
Maggie’s Doug from Camera Land's Day 2 SHOT Show Report
Replies
3
Views
923
Sigma
Sigma
Top Bottom
Back
Home
Forums
Merch
Alerts