@Frank Green does bartlein offer LH twist on carbon fiber barrels?
- Thread starter dirthead1
- Start date
yes they were dipped by Mesa. Quality is the best I've seen for hydro dipped. They put a slight sandpaper grit and it feels perfect.
Is it correct to assume this is just a blank?
Good to know. I’ll probably be ordering one with Lh gain twist shortly
Just Picked my 28 Nosler up from 5x5 percision. Chad did and amazing job. Was so excited to get it in a stock i pulled my 300 win mag and test fit it in that stock while i wait for the Mcmillian i ordered to come in. the Weight was with out the bipod
Attachments
Just got my rifle done with a 24” 1:7.5tw varmint contour chambered in 6.5prc from Spartan Precision Rifles. Going to have the action, barrel shank, muzzle and brake cerakoted tomorrow and then put some rounds down range next weekend. Barrel is gorgeous. A bit heavier than expected but it’s a pleasant surprise as I’ll put a decent amount of rounds through it so hopefully there’s no heat issues.
Attachments
What contour/length was this one? Thanks.
Can someone post a pic of a #14 Carbon Contour build?
Since the 1st one turned out so well I figured I'd have another one built just like it - the twins
Rebarreled 22-250
1:7 fast twist (88-90 grain 0.224)
Self Cerakote Action, Barrel and Bolt
Self Duracoat Stock
Self install XLR Cheek Riser
1:7 fast twist (88-90 grain 0.224)
Self Cerakote Action, Barrel and Bolt
Self Duracoat Stock
Self install XLR Cheek Riser
Last edited:
Nice!
What stock is this?
Just received my newest 22” Bartlien CFW in 300 WM, scoped rifle is 6.5 SAUM 22” Bartlien CFW. Thanks for the great barrels for my project. Looking forward to using the 300wm on a moose hunt in November. 
Mine will be built by Strait Jacket as well, I live 30 minutes from them.
Waiting on my barrel from GA precision, ordered a 20" 8 twist 30 cal green #4 carbon on November 11th. They said 5-6 months, so April-May. Does anyone know if they have been keeping their timelines?
XLR Element 4.0 magnesium chassis, carbon stock/grip, folder
3 rd AICS mag
Bat Vampire mag bolt face
Vortex precision (Seekins) rings
March 2.5-25x52
Jewel HVR
All together minus barrel, is 6 lbs even. Will also have a Silencerco harvester can on it, so add 11 oz to that. Figuring the barrel around 2 lbs 6ish oz once all the machining is finished, so all up with the can, 9 lbs +- a couple ounces. Should be a sweet pack rifle.
Waiting on my barrel from GA precision, ordered a 20" 8 twist 30 cal green #4 carbon on November 11th. They said 5-6 months, so April-May. Does anyone know if they have been keeping their timelines?
XLR Element 4.0 magnesium chassis, carbon stock/grip, folder
3 rd AICS mag
Bat Vampire mag bolt face
Vortex precision (Seekins) rings
March 2.5-25x52
Jewel HVR
All together minus barrel, is 6 lbs even. Will also have a Silencerco harvester can on it, so add 11 oz to that. Figuring the barrel around 2 lbs 6ish oz once all the machining is finished, so all up with the can, 9 lbs +- a couple ounces. Should be a sweet pack rifle.
Has anyone ordered a mod bb cfw blank yet? Thinking i need that in my life for a 22 creedmoor hunting build.
Anyone know if Bartlein offers ther CF barrels in a DT contour for the SRS?
I have one in 7mm on the way (8.5 twist 20” finish length, 400MODBB CF). It should be here in Feb or March. I’m going to chamber it in 7SS.
Mine is at straight jacket. Going to see if the new material is as bad ass as they say. Hot rod 257 Roy for deer and wolves.
25 Creed wasn’t hot enough, eh?
I have one in 6.5 sitting here for a build once all my parts arrive.
Random but does anyone know if i could fit a #4 on a sako 85 hunter stock without taking away too much of the foreend
Do they have a CF #3?
#13 (Sendero contour) is correct, NOT #3. #4 Bull Sporter and #13 Rem. Varmint/Sendero are the only "sporter" contour carbon fiber wrapped. I have a #4 that is very nice but it's not a small profile sporter contour.
No, they don't have a #3
Bartlein carbon fiber wrapped contours:
#4 Bull Sporter (smallest)
#13 Rem Varmint/Sendero (middle)
#14 M24 (largest)
Contour Dimensions | Bartlein Barrels
www.bartleinbarrels.com Oregon what stocks are those?Since the 1st one turned out so well I figured I'd have another one built just like it - the twins
Those are Proof Research stocks. IMHO they are a heck of a nice stock for a more traditional style stock that is super lightweight and plenty rigid. I wish they still sold them but it looks like you can now only get them on Proof built rifles.
Not sure I understand the question but I was told it has to be an even number. I asked for a 21” finish and was told it had to be a 22”
I’m probably thinking of benchmark then
Depending on what you plan to build you can cut off some of the shank end to get a 22" down to pretty close to 21". On both of my 7MM-08 builds per Frank Green he said no problem taking off a bit as long as it wasn't some sort of big magnum. My 24" barrels ended up just over 22" once finished and have been great shooters! But that would be removing metal and not the CF wrap.
Agree with @Oregonmuley - go with a short shank and cut a little more off the muzzle and you can lose an extra inch.
Are they still making #4s? Trying to find a 7mm blank to snag one for this 7prc build.
They do, but they are tough to find in stock these days. Bartlein does have one in their inventory now but not sure if the length will work for you??
Looking to finish at 23” so I’m not sure since it doesn’t specify
Bartleins are 25” to finish at 24”, or 23” to finish at 22”
I’ve got a spare 23” #4 with 8.5 twist I’ve been saving for a 7mm08 build. @Oregonmuley has me watching his builds!
I’ve got a spare 23” #4 with 8.5 twist I’ve been saving for a 7mm08 build. @Oregonmuley has me watching his builds!
27” on list so finish at 26”?That length says 27” on the list though.
You trying to get rid of yours?
No I think I’m gonna keep it. Prices just keep going up…
Similar threads
