Base and Rings for AXCS

[Bob7608]

If i went with a 20 moa badger or seekins base, what size rings would I need for an AI AXCS? It is my understanding that medium rings do not give sufficient clearance on the free floating rail. My scope is a NF 3.5-15 NXS.

 

[kydron]

Re: Base and Rings for AXCS

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: RS303</div><div class="ubbcode-body">If i went with a 20 moa badger or seekins base, what size rings would I need for an AI AXCS? It is my understanding that medium rings do not give sufficient clearance on the free floating rail. My scope is a NF 3.5-15 NXS. </div></div>

Based on historic responses from others here, a height of 1.265" for a 50mm objective will suffice in clearing the forend. I have also heard a report that the 1.25" Badger rings worked as well. For the 56mm you apparently need around a 1.375" ring height. Some users confirmed the NF Ultralites worked in these heights. Not sure about the Badger or Seekins equivalent.

My reference threads below:

aics ax ring height question

New Rings OR Scope Riser (AX)

 

[misterp36]

Re: Base and Rings for AXCS

Can you not get the AI Base ?

 

[kydron]

Re: Base and Rings for AXCS

I don't believe these are available yet.

 

[Squid284]

Tag