What chassis are some of you guys running?
- Thread starter Forrest84
- Start date
I run the MPA. Been wondering the same thing. Thinking about moving the RimX to the MPA and getting another chassis for the Bergara. The MPA is a great chassis for the Bergara. Just make sure it has the Mag height adjustment on the mag catch.
Here is mine in the MPA chassis before I added the folding hinge. 
I borrowed my V22s MDT LLS Gen2 Chassis and it worked out really well. I also tried my Trigger Tech Diamond in the B14R
and had great results with it. My first time at the LGC and a new target type. My stock Bergara shoots well enough that I'm not sure
that I will ever change anything. I'm thinking of keeping her for my Factory class gun. That said, and being a trigger snob, I wish the
trigger was more refined. Shots #11 and #12 were my blunders. I thought I had much less time after the mag change.
The only change I made was to swap the bolt knob to a V22 type.
and had great results with it. My first time at the LGC and a new target type. My stock Bergara shoots well enough that I'm not sure
that I will ever change anything. I'm thinking of keeping her for my Factory class gun. That said, and being a trigger snob, I wish the
trigger was more refined. Shots #11 and #12 were my blunders. I thought I had much less time after the mag change.
The only change I made was to swap the bolt knob to a V22 type.
Attachments
Been considering getting a PDC chassis lately. They are pretty nice and cheap even with some of the extra features. Plus’s I need to be able to use my PVS 30 on it
Anybody put theirs into a krg? Any benefit over the factory B-14R stock?
I've got mine in a krg bravo. I know a lot of people say the hmr stock is pretty much the same as the bravo but it is not to me. The reach to the trigger on the hmr was a tad long for me. With the bravo, it feels like the trigger is a lot closer which makes me feel like I can get a better trigger pull. It just seems a lot more comfortable to me.
As far as the install, yes it was a bear. Tried every adjustment that was recommended and nothing worked. As a last resort I ordered the extended mag catch from krg. I would file a little off and try to seat the mag. It took a little while cause I wanted to make sure I didn't file too much. I got it just right and it has fed better than it ever did with the hmr stock. It fed ok with the hmr stock but now it just seems to feed a lot smoother if that makes sense.
I've got over $600 in my bravo because of all the add ons so u may want to consider that as well.
As far as the install, yes it was a bear. Tried every adjustment that was recommended and nothing worked. As a last resort I ordered the extended mag catch from krg. I would file a little off and try to seat the mag. It took a little while cause I wanted to make sure I didn't file too much. I got it just right and it has fed better than it ever did with the hmr stock. It fed ok with the hmr stock but now it just seems to feed a lot smoother if that makes sense.
I've got over $600 in my bravo because of all the add ons so u may want to consider that as well.
