Who makes the best neck turning tool, I purchased the RCBS and it does not cut evenlly.Looking for a more presice tool!
Best neck turning tool
- Thread starter perazzisc3
- Start date
Re: Best neck turning tool
http://www.pmatool.com/index.php/cPath/27_42_78?osCsid=ffa7cadbc58cc726a128af42acefa834
http://www.pmatool.com/index.php/cPath/27_42_78?osCsid=ffa7cadbc58cc726a128af42acefa834
Re: Best neck turning tool
Another option is K&N. I only have used the K&N so cant comment on the others.
http://www.kmshooting.com/
Cheers,
J
Another option is K&N. I only have used the K&N so cant comment on the others.
http://www.kmshooting.com/
Cheers,
J
Re: Best neck turning tool
Generally you turn the necks one time, before any other operations except expanding the neck with a mandrel just enough to fit over the pilot of the neck turning tool.
Afterwards, depending on the size of the expander/pilot combination you're using, you may need to size the neck some to get sufficient neck tension to hold the bullet for the initial firing.
Generally you turn the necks one time, before any other operations except expanding the neck with a mandrel just enough to fit over the pilot of the neck turning tool.
Afterwards, depending on the size of the expander/pilot combination you're using, you may need to size the neck some to get sufficient neck tension to hold the bullet for the initial firing.
Re: Best neck turning tool
http://www.accurateshooter.com/gear-reviews/neck-turning-lathe-from-21st-century/
Uses sort of a "floating" design concept
http://www.accurateshooter.com/gear-reviews/neck-turning-lathe-from-21st-century/
Uses sort of a "floating" design concept
Re: Best neck turning tool
I have used the Sinclair expanding Mandrel and turning mandrel system with great results and no problems with it. I combine it with a battery screw diver for ease of use.
JeffVN
I have used the Sinclair expanding Mandrel and turning mandrel system with great results and no problems with it. I combine it with a battery screw diver for ease of use.
JeffVN
Re: Best neck turning tool
I use a 21st Century turner, I don't know if it's the best or worst, it's the only one I have ever used, but it simply works, very easy to set up, comfortable in the hand, adjustments are easy and highly repeatable.
I use a 21st Century turner, I don't know if it's the best or worst, it's the only one I have ever used, but it simply works, very easy to set up, comfortable in the hand, adjustments are easy and highly repeatable.
Re: Best neck turning tool
I use the 21st century turner. It works really well for me. I use a 1/2" drill on low speed and just drop the case in the chuck. Really fast and repeatable. I wait until I have a couple of firings on new brass before I turn them so I can get really consistent trim length on everything without being too short.
I use the 21st century turner. It works really well for me. I use a 1/2" drill on low speed and just drop the case in the chuck. Really fast and repeatable. I wait until I have a couple of firings on new brass before I turn them so I can get really consistent trim length on everything without being too short.
