Looking to mount a Schmidt & Bender PMII 5-25x56 on my Accuracy International AXMC in .300 Win. Currently looking into Spuhr’s ISMS mount but I’m unsure of which variant/size would yield the best results. Any input would be greatly appreciated.
Best Spuhr mount for AXMC
- Thread starter Cnyshooter
- Start date
Spuhr, Will It Fit? - Mile High Shooting
Most items from Spuhr are marked with a model number and a batch number. When ordering please refer to the model numbers.
www.milehighshooting.com
This list shows the minimums for each setup.
If you’ll ever run clip on night vision, you’ll need the 1.5”, or 1.535” height. I have a 0moa Mount on mine, as well. You should be able to reach 1600+ yards with that setup, depending on your local atmospheric data.
Technically if you want to squeeze every bit of mechanical elevation out of your optic you can run a SP-4302 (10.3 MOA).
30 MOA on the rifle and the 10.3 MOA mount gives you 11.7 MILs of declination. A good spot to be for maximum elevation travel on a S&B 5-25x (26 MILs dialable, a random bit more useable).
I do have a particular S&B 5-25x that still zeros just fine at 100 yards running 50 MOA total declination. Optically I can’t tell a difference, plus it’s generally dialed around the mid-travel or higher anyhow.
30 MOA on the rifle and the 10.3 MOA mount gives you 11.7 MILs of declination. A good spot to be for maximum elevation travel on a S&B 5-25x (26 MILs dialable, a random bit more useable).
I do have a particular S&B 5-25x that still zeros just fine at 100 yards running 50 MOA total declination. Optically I can’t tell a difference, plus it’s generally dialed around the mid-travel or higher anyhow.
Similar threads
