Gunsmithing Brownells Torx Drivers Set

[mildot326]

So I've been looking for a good quality set for some minor gun-smithing on my rifles, scope mounting etc. I came across these for about $23. I'm just curious to know if anyone else is using them and
the quality and performance they are getting out of the set?. I guess I'm asking is it a "good bang for the buck" . Thanks

 

[BigBlue&Goldie]

Those appear to be made by Bondbus, so they should be very good quality. I dont have these torx drivers, but I have Bondhus torx keys and they are great.

 

[FTC]

If you're going to use them to mount scopes/rings might as well get the hex bits, then you can change between the screwdriver handle and torque wrench.

 

[Rthur]

I agree with FTC, one good screw driver plus torque wrench with bits.


R

 

[shoot4fun]

I agree with FTC, one good screw driver plus torque wrench with bits.


R

I agree with you both, for the most part, on the bits. I have them, along with just about every other bit made by Brownell's and they are great tools but I have seen the time when you just can't get the bit in to certain places because of the size of the bit holder. That is when this set shown above will be your saving grace. So I say get the bit set and the ones you have asked about. You can never have too many tools for this game.

 

[mildot326]

So the consensus is that I won't have to worry about the quality, and the lifetime guarantee is a bonus as well. Thanks

 

[Lumpy Grits]

Get the inserts so you can use a torque driver/wrench.
Brownell's screwdriver bits and handles are all USA made with lifetime guarantee.
Been using my set for almost 20yrs.
LG

 

[mildot326]

I already have a torque wrench, and a screwdriver bit set, I wanted a "quality" torx driver. Thanks

 

[Lumpy Grits]

Then those would be GTG!
LG