Rifle Scopes Bubble level too close for comfort.. Need advice

[mluning]

While I was mounting up a new scope I ran into a problem with a question.

I'm using IOR 35mm low rings on a Badger 20 moa base and my bubble level I feel is too close to the scope. Maybe 1mm or two.

Will this be a problem?

Here's a crappy iphone picture to show what I'm talking about.

 

[707electrician]

Re: Bubble level too close for comfort.. Need advice

Looks fine to me

 

[okrebel92]

Re: Bubble level too close for comfort.. Need advice

I don't see any issues.

 

[George63]

Re: Bubble level too close for comfort.. Need advice

if you can slide paper between it is fine

 

[JByrd]

Re: Bubble level too close for comfort.. Need advice

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: George63</div><div class="ubbcode-body">if you can slide paper between it is fine </div></div>

this, plus the position is so close to the ring the scope tube physically cant flex there, not like a big objective bell hangin out over a bbl by a hair of clearance.

 

[jjhelt]

Re: Bubble level too close for comfort.. Need advice

Yes, considering where it is mounted by the ring where the scope will not flex...any clearance is enough clearance

 

[bcpdshooter]

Re: Bubble level too close for comfort.. Need advice

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: JJ79</div><div class="ubbcode-body">Yes, considering where it is mounted by the ring where the scope will not flex...any clearance is enough clearance </div></div>

+1 do to its location you will have no problems with it.

 

[mluning]

Re: Bubble level too close for comfort.. Need advice

I appreciate the help guys. Went ahead and mounted it up. Just wanted to make sure I wasn't going to screw something up after I pull that trigger.