Bullseye Ammo Can 300yd sight in edition mini router GL-AR150 configuration

[jsimmy23]

Not sure if correct location to post this, but read a post from a memeber named "thewolf" a few years ago about setting up his own target camera system by cloning the Bullseye Target System. I'm hoping to find info from anyone currently owning this edition type of the Bullseye Ammo Can 300yd sight in Target Camera System , that could possibly share the GL-AR150 router configuration settings with the system on board camera FOSCAM Model FC1405PC. Hard reset of GL-AR150 mini-router caused the erasing of all Bullseye target system configuration for router/camera settings.

If not the correct location for this post, please direct me to the proper location on the site. Thanks!

 

[340 Weatherby]

Hmm, if you can get into the camera you can see what IP addresses that are used. The system I had was with two routers to transmitt over longer range.
Camera settings:

IP adress:	192.168.1.252
Subnet mask:	255.255.255.0
DNS:	192.168.1.1
Default Gateway:	192.168.1.1
Port:	80
Username:	bullseye
Password:	**********
Camera name:	BullseyeCamera

For the network:

IP adress:	192.168.1.252
Subnet mask:	255.255.255.0
DNS:	192.168.1.1
Default Gateway:	192.168.1.1
Port:	80

Hope this info can get you started. Also if the camera is Foscam there is a software you can use to get the info from the camera.
The program is called Equipment search Tools.

 

[jsimmy23]

Hmm, if you can get into the camera you can see what IP addresses that are used. The system I had was with two routers to transmitt over longer range.
Camera settings:

IP adress:	192.168.1.252
Subnet mask:	255.255.255.0
DNS:	192.168.1.1
Default Gateway:	192.168.1.1
Port:	80
Username:	bullseye
Password:	**********
Camera name:	BullseyeCamera

For the network:

IP adress:	192.168.1.252
Subnet mask:	255.255.255.0
DNS:	192.168.1.1
Default Gateway:	192.168.1.1
Port:	80

Hope this info can get you started. Also if the camera is Foscam there is a software you can use to get the info from the camera.
The program is called Equipment search Tools.
View attachment 8297367

Thanks for the information, but back in August thewolf replied and solved the problem for me.