If you buy the cal with 2 screw pic rail mount, could you take it off and put on an adm mount?
- Thread starter Runnineh
- Start date
There are 3 models. The no clamp (cut for an adm or RRS clamp) The clamp (comes with adm, but adm can be removed if you want RRS later) or the Picatinny only mount (not a removable mount and has two screws from the side).
If the one below is what you’re asking, no you can NOT remove the picatinny mount. You will need either the no clamp or the one that comes with the ADM.
Accu-Shot Monopod Precision Shooting Rifle Rest Magpul PRS Rail
Accu-Shot precision monopods, Atlas bipods and rifle accessories provide a high-degree of accuracy for long-range hunting, law enforcement or military duty.
www.accu-shot.com 
American Defense AD-170-VPG Riser 3-Lug Rail Quick-Release
The American Defense AD-170-VPG is a quick-release picatinny-style rail adaptor featuring a 3-lug rail. Constructed of durable 6061 T6 Aluminum and...
www.midwayusa.com You can use a picatinny riser with the picatinny mount bipod.
Your right I didn't know that 2 screw pic clamp was built into the cant mount....There are 3 models. The no clamp (cut for an adm or RRS clamp) The clamp (comes with adm, but adm can be removed if you want RRS later) or the Picatinny only mount (not a removable mount and has two screws from the side).
If the one below is what you’re asking, no you can NOT remove the picatinny mount. You will need either the no clamp or the one that comes with the ADM.
Accu-Shot Monopod Precision Shooting Rifle Rest Magpul PRS Rail
Accu-Shot precision monopods, Atlas bipods and rifle accessories provide a high-degree of accuracy for long-range hunting, law enforcement or military duty.
But he can still convert it.
Accu-Shot Monopod Precision Shooting Rifle Rest Magpul PRS Rail
Accu-Shot precision monopods, Atlas bipods and rifle accessories provide a high-degree of accuracy for long-range hunting, law enforcement or military duty.
www.accu-shot.com Bought the pic rail option and really should of bought the ADM qd. Emailed customer service and had the response below.
You will need both parts to convert it over to a QD mount.
Thank you for your continued interest in our products
You could use the BT43, but you would have to keep the rail on it
A better option would probably be our BT6569ML-NC and the ADM-170-S lever
Here is the link to the BT6569ML-NC: https://www.accu-shot.com/catalog_new/hardware/272-bt71-ml45-cal-nc-mount.html
Here is the link to the ADM-170-S Lever: https://www.accu-shot.com/catalog_n...nufacturer/105-adm-170-s-atlas-accessory.html
You will need both parts to convert it over to a QD mount.
Thank you for your continued interest in our products
You could use the BT43, but you would have to keep the rail on it
A better option would probably be our BT6569ML-NC and the ADM-170-S lever
Here is the link to the BT6569ML-NC: https://www.accu-shot.com/catalog_new/hardware/272-bt71-ml45-cal-nc-mount.html
Here is the link to the ADM-170-S Lever: https://www.accu-shot.com/catalog_n...nufacturer/105-adm-170-s-atlas-accessory.html
Thanks man!There are 3 models. The no clamp (cut for an adm or RRS clamp) The clamp (comes with adm, but adm can be removed if you want RRS later) or the Picatinny only mount (not a removable mount and has two screws from the side).
If the one below is what you’re asking, no you can NOT remove the picatinny mount. You will need either the no clamp or the one that comes with the ADM.
Accu-Shot Monopod Precision Shooting Rifle Rest Magpul PRS Rail
Accu-Shot precision monopods, Atlas bipods and rifle accessories provide a high-degree of accuracy for long-range hunting, law enforcement or military duty.
You can also use the AD 170 VPG. I have several set up that way.
