WTB Case modification service.

[Dave__th3__ss]

Looking for someone that can correctly modify a case to check my OAL for my 338 edge+p

I’ll send you an edge case and you thread it to accept the Hornady OAL checker 5/16" x 36

Please don’t accept it unless you are capable of doing it. Edge brass is not cheap.

 

[Sprayed99]

Send it to short action customs

 

[Dave__th3__ss]

Send it to short action customs

just emailed them . I’d do it myself but don’t have a lathe or access to one. I’d hate to screw up my adg edge brass trying to do it with a drill. Edge brass is hard to come by and not cheap

 

[Jabot]

Did mine with a drill and a hand tap. Takes about 10 minutes

 

[BuildingConceptsllc]

just emailed them . I’d do it myself but don’t have a lathe or access to one. I’d hate to screw up my adg edge brass trying to do it with a drill. Edge brass is hard to come by and not cheap

It's very easy to do with a hand tap if using an unprimed case.

 

[Iamero]

Copper creek is a solid option too. They did my 338 NM and 375 Cheytac and they’re perfect.

 

[whatsupdoc]

Do you have access to a drill press, it is easy.
Lube the case press it into the die without the expander button, depending on the press pop the shellholder and remove the
die with the case in it.

Clamp the die in a drill press vise drill and tap.

 

[Aftermath]

Hornady is not expensive.