CTS case Trimmer review.... FAST!

[Ring]

CTS case Trimmer review.... FAST!

to buy, contact [email protected]

after using this, now i want 1 for my 50bmg...


http://youtu.be/5ptVYawCfuE

 

[FCS]

Looks a lot like a WFT.

Early in video he says no need for inside/outside chamfer but I disagree. Clearly there is a sharp edge present and an inside chamfer at minimum would be a good idea.

Just looked it up, WFT from Little Crow Gunworks has increased in price. I might have to give one of the CTS trimmers a try, not sure I'll get my WFT back from a buddy I lent trimmer to.

 

[scudzuki]

I bought 2 Possum Hollow trimmers (.223 and .308 family) plus a drill adapter for a little over $50 shipped, and they work very well.
https://www.possumhollowproducts.com/KWICK_CASE_TRIMMERS.html

Joe

 

[Ring]

I bought 2 Possum Hollow trimmers (.223 and .308 family) plus a drill adapter for a little over $50 shipped, and they work very well.
https://www.possumhollowproducts.com/KWICK_CASE_TRIMMERS.html

Joe

this is a older review of a CTS VS possum hollow

http://www.calguns.net/calgunforum/showthread.php?t=587361

 

[scudzuki]

I read the review and chuckled a little.

I recently ran off 5k .223 one fired cases.
Since I have a tabletop mill for secondary operations and drilling, I held the PH trimmer directly in a 5/8" collet.

Did not have a problem with case length variation, not did the cutter clog up or bitch up the end of the case.

Any case I trim gets chamfered, so the tiny burr that the PH cutter leaves is a non issue.

I also trimmed a $hit ton of .308, same result.

Pretty good for $30 each.

The CTS looks like a nice trimmer, too.

Joe

 

[Ring]

update...

i got the 50 BMG trimmer.... NICE.... ill do a vid when i get the chance...

 

[bluto77]

I sent the guy an email. How much did it cost? And can you tell us anything more about it?

 

[Ring]

I sent the guy an email. How much did it cost? And can you tell us anything more about it?

42,95 each + 3.50 shipping
67.95 for .338 Lapua, .408 Chey Tac, .50 BMG etc..........+ 5.50 shipping.

 

[athhud]

I love my CTS trimmers, but if you don't chamfer you'll end up with lighter bullets....