EGW offer a 20moa clamp style base for CZ 3/8 dovetail. I need one for the 11mm dovetail on a 22lr. Varmint.
I thought I saw one here but cannot find it.
I thought I saw one here but cannot find it.
CZ 11mm Dovetail Needs Clamp on base
- Thread starter SporterII
- Start date
Re: CZ 11mm Dovetail Needs Clamp on base
Here is the one 762 meant, one standard and one extended, and they are 25 moa
http://www.diproductsinc.com/Detail.aspx?PROD=112052&CAT=3600
http://www.diproductsinc.com/Detail.aspx?PROD=175301&CAT=3600
Here is the one 762 meant, one standard and one extended, and they are 25 moa
http://www.diproductsinc.com/Detail.aspx?PROD=112052&CAT=3600
http://www.diproductsinc.com/Detail.aspx?PROD=175301&CAT=3600
Re: CZ 11mm Dovetail Needs Clamp on base
I 2nd the dip, just got mine and really like it. I went with the extended
I 2nd the dip, just got mine and really like it. I went with the extended
Re: CZ 11mm Dovetail Needs Clamp on base
Would you guys please show me the clamps on them DIP rails, all I see is verticle set screw holes.
EGW makes a 3/8in picatinny rail with standard clamps with standard horizontal screws to tighten them clamps.
Here's a link for EGW's 3/8in 20moa canted or non-canted http://swfa.com/CZ-C3060.aspx .
Oops, my bad, EGW ony makes the clamp on 11mm picatinny in a zero non canted version.
Click the select MOA button. http://www.egwguns.com/other-scope-mounts/hd-cz-452-picatinny-rail-scope-mount/
You can see the clamp with recessed screws in picture on the right.
Sam
Would you guys please show me the clamps on them DIP rails, all I see is verticle set screw holes.
EGW makes a 3/8in picatinny rail with standard clamps with standard horizontal screws to tighten them clamps.
Here's a link for EGW's 3/8in 20moa canted or non-canted http://swfa.com/CZ-C3060.aspx .
Oops, my bad, EGW ony makes the clamp on 11mm picatinny in a zero non canted version.
Click the select MOA button. http://www.egwguns.com/other-scope-mounts/hd-cz-452-picatinny-rail-scope-mount/
You can see the clamp with recessed screws in picture on the right.
Sam
Re: CZ 11mm Dovetail Needs Clamp on base
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: condor22</div><div class="ubbcode-body">Would you guys please show me the clamps on them DIP rails, all I see is verticle set screw holes. </div></div>
that is all it has.
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: condor22</div><div class="ubbcode-body">Would you guys please show me the clamps on them DIP rails, all I see is verticle set screw holes. </div></div>
that is all it has.
Re: CZ 11mm Dovetail Needs Clamp on base
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: clayne_b</div><div class="ubbcode-body"><div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: condor22</div><div class="ubbcode-body">Would you guys please show me the clamps on them DIP rails, all I see is verticle set screw holes. </div></div>
that is all it has. </div></div>
Not what the OP's looking for. If you use the DIP, be sure to drop a lead shot under each set screw to prevent 'em chewing the blue in off that purdy CZ receiver.
Sam
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: clayne_b</div><div class="ubbcode-body"><div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: condor22</div><div class="ubbcode-body">Would you guys please show me the clamps on them DIP rails, all I see is verticle set screw holes. </div></div>
that is all it has. </div></div>
Not what the OP's looking for. If you use the DIP, be sure to drop a lead shot under each set screw to prevent 'em chewing the blue in off that purdy CZ receiver.
Sam
Re: CZ 11mm Dovetail Needs Clamp on base
I have not seen them first hand, but it looks like it slides on from the end and the set screws hold it in place, not really a true "clamp-on", but It should hold fine unless you are extremely hard on it.
I have not seen them first hand, but it looks like it slides on from the end and the set screws hold it in place, not really a true "clamp-on", but It should hold fine unless you are extremely hard on it.
Re: CZ 11mm Dovetail Needs Clamp on base
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: 264win</div><div class="ubbcode-body">Are the links working for everyone else ? </div></div>
All the links work for me, are they not for you?
Lee
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: 264win</div><div class="ubbcode-body">Are the links working for everyone else ? </div></div>
All the links work for me, are they not for you?
Lee
Similar threads
