CZ 457 in a KRG Bravo?
- Thread starter BLJ
- Start date
10 rounds work fine for me. I don't have any extended to play with. I haven't had any issues with my bravo/cz setup.
I don't generally try jamming my mag into barricades so I don't know. I have polymer mags and the magazines feel cheap. I generally run a bag and push the little bit of magwell on the bravo into the bag, yes the magazine is pushed against but not like a full on barricade stop. Haven't had any feeding issues.
The length of pull is 13.75", not adjustable, but you could buy the rimfire LoP thing they offer for the bravo.
All in all I don't have any complaints.
Ive used the anarchy and dip extended mag releases, both work great in my bravo with 10 round mags, not so much the 5 rounders always.
If you are wanting to get a little more edge on the magwell grab this. https://kineticresearchgroup.com/product/barrier-stop/
Used this combo in a handful of matches and performed great.
If you are wanting to get a little more edge on the magwell grab this. https://kineticresearchgroup.com/product/barrier-stop/
Used this combo in a handful of matches and performed great.
@littlepod. I was under the impression from the site description that the chassis had an adjustable LOP. Is this not the case.
@WAsquirrelsniper. Thanks for the info. I would likely pick up an extended barricade stop to be sure.
@WAsquirrelsniper. Thanks for the info. I would likely pick up an extended barricade stop to be sure.
The lop is adjustable in that they provide spacers to adjust it or you can buy the new rimfire lop kit. I have one and it works great, both ways work.
It is, with spacers. Just not quick adjust https://kineticresearchgroup.com/product/rimfire-tool-less-lop/
