Dbm question

[MULLINS2171]

I have a Remington 700 chambered in 3006. I have been looking for a dbm setup that works but every long action dbm is for 300 win mag. I have been looking for week on the net. Anyboy have any suggestions on where to look. Or will the 300 win mag work. Thanks in advance

 

[diverdon]

https://www.midwayusa.com/product/5...e-trigger-guard-for-remington-700-long-action
http://www.brownells.com/rifle-part...action-detachable-bottom-metal-prod73347.aspx
http://www.badgerordnance.com/triggerguards.html?___SID=U

If it were me I would go with the badger.

 

[BobinNC]

http://store.accurate-mag.com/sssf30-06springfieldandothers.aspx

Then you can use just about any Rem 700 LA Bottom metal. I recommend this http://www.cdiprecisiongunworksstore.com/remington-700-long-action-dbm/

They will also inlet your stock for free....

 

[davisj3537]

There are 3 or 4 options for this and which you choose depends on your budget and how sturdy you want it to be. CDI precision mentioned above is a solid choice. Pacific Tool and Gauge has 1 that comes with a 3006 DMB and bottom metal for $100. It does need a little work on the mag to work with the bottom metal, but it's held up fine for me; I'm running it in a 3006 myself. Wyatt's DBM are another though they are notoriously long due to single stack design. The last one I found was HS Precision pro steel. All of these companies sell BDL drop in DBM systems with a 3006 in mind.

There are of course a lot more options, but not any more options I'm aware of that are drop in to BDL inlet. CDI gets a pass since they'll inlet for free.

 

[ktaylor]

My Taylor Precision DBM fits with minimal inletting. Here is a picture installed on an HS Precision stock.

 

[MULLINS2171]

Sorry so long to get back to y'all but thanks for all y'alls help