If I'm using a 650, and I suddenly, for whatever reason, decide that I want to stop feeding primers for a moment, (say, to adjust powder, or length, or whatever, using the same round without feeding new brass) is there an easy way to stop the machine from loading primers, or do I have to clear the entire primer system?
Dillon 650 Primers
- Thread starter Jammer Six
- Start date
This is the cats ass! This will fix you up!
Dillon Primer stop switch For XL 650 | eBay
Simply loosen those two screws, push the bracket just like I am with your finger, and snug the screws back up. It's just the luck of assembly, not everyone has to do it. The only installation detail to look for is the fail-safe bracket for the powder drop often needs to be moved as in picture #3.
www.ebay.com
Last edited:
Yup, What jetsurgeon reccomended is a 650 upgrade that is long overdue. Had mine for a year and still grin everytime I use it.
Yes he has that covered as well, I have just about all of “snowshooze” stuff on eBay for my 650, his stuff should come standard. I’ll get you the case feed stop here in a sec.
Case feed stop...
Dillon XL 650, XL 750 Case Feed Stop Switch | eBay
Positioned too far left, it can crash the Case Drop Pawl at full top stroke. At top stroke, it is fully clear of the Case Drop Pawl. This is my Case-Feed Stop Switch for the Dillon XL 650 as well as the new XL 750.
www.ebay.com
Yep that will work as well. For years I used a set of pre bent wires to stop the case feed and primer feed, both worked, just liked how SnoeShooze did his.
Happy 4th!
Happy 4th!
I just bent a wire to hold the lever back. Works great.
I also drilled a hole in the black indexing thing on the left side of the ram and have a pin spring setup holding it clockwise so it does not index.
Definitely helps.
I also drilled a hole in the black indexing thing on the left side of the ram and have a pin spring setup holding it clockwise so it does not index.
Definitely helps.
