Rifle Scopes Do you know of a 20 MOA SPR scope mount with a ring height less than 1.5"?

[Magnetic]

I'm trying to find a 20 or 30 MOA SPR style scope mount with a ring height that is less than 1.5" so that I don't need to use a cheek riser. The closes thing I have found is the ADM Recon-SL, but it is not extended and would require that I bridge the handguard.

 

[308pirate]

Not sure, but Spuhr and ERA-TAC might.

 

[Trigger Monkey]

Is it a necessity that it be quick detach? If not, the Nightforce Unimount and Badger Ordnance Unimount have options that fit within your requirements. Both are 20 MOA cantilever mounts with heights under 1.5"

 

[EXTREMEPREJUDICE]

Bobro at 1.43"......................less than 1.5" but not by a lot.

 

[Magnetic]

Is it a necessity that it be quick detach? If not, the Nightforce Unimount and Badger Ordnance Unimount have options that fit within your requirements. Both are 20 MOA cantilever mounts with heights under 1.5"

I did not not know about the Badger Unimount. It appears they have a 1.3 SPR mount that will work. Thank you very much.

 

[Magnetic]

Not sure, but Spuhr and ERA-TAC might.

Spur has one, but only in 0 MOA. Thank you though.

 

[Wyzrd]

I’ve used the NF unimounts in the past, and I believe they have a model that fits your criteria.

 

[Magnetic]

I’ve used the NF unimounts in the past, and I believe they have a model that fits your criteria.

They do for 30mm but not for 34mm. I should have mentioned that in the first post.

 

[pdd614]

Aadmount would work.

 

[cleric]

Lt158 (larue) has 10 Moa.

 

[Magnetic]

Aadmount would work.

According to the website it is only available in 30mm. 1.45" is less than 1.5" but I was looking for something more along the lines of 1.25". The Badger is 1.3" and the best option so far. thanks.

 

[EchoDeltaSierra]

ADM makes nice mounts. Lots of choices and they provide product measurements on their site.

https://www.americandefensemanufacturing.com/view/product/298/

 

[Magnetic]

ADM makes nice mounts. Lots of choices and they provide product measurements on their site.

https://www.americandefensemanufacturing.com/view/product/298/

The Recon-SL would be perfect, but it is not a cantilever mount.

 

[Johnsond19d]

The Recon-SL would be perfect, but it is not a cantilever mount.

I'm trying to find a 20 or 30 MOA SPR style scope mount with a ring height that is less than 1.5" so that I don't need to use a cheek riser. The closes thing I have found is the ADM Recon-SL, but it is not extended and would require that I bridge the handguard.

You may want to take a lot at the warne msr mount it is just under your 1.50 at 1.40 but has quick detach and 20 moa built in.https://warnescopemounts.com/product/lrskel30tg-20moa-extended-skeletonized-30mm-msr-mount-black/

 

[pdd614]

According to the website it is only available in 30mm. 1.45" is less than 1.5" but I was looking for something more along the lines of 1.25". The Badger is 1.3" and the best option so far. thanks.

Aadmount comes in 30mm, 34mm, and 35mm. No lower height options than 1.45.
http://shop.aadmount.com/AR-Mounts_c2.htm

 

[phlegm]

If you require the 20MOA, they only offer the 1.25" height, but this is still the lowest 34mm mount I've seen.

 

[Magnetic]

If you require the 20MOA, they only offer the 1.25" height, but this is still the lowest 34mm mount I've seen.

I need a cantilever / SPR style to avoid bridging my upper receiver to the handguard.

 

[Magnetic]

I did find this gem today and it looks like the nicest of the options so far, but also the most expensive...

ARC M10 QD-L