EGW extended 20 moa 10/22 base - how tall is it?

[hunter121]

I did a search and couldn't find the info I was looking for, but I did find a few pictures which were nice for the visual. Im trying to figure out what size rings to get and need to know how tall the base is. I plan on useing the burris extreme rings with a Weaver Extreme 2.5x10-56.

Any help is appreciated, thanks.

Ryan

ETA picture of my new 10/22

 

[hunter121]

Re: EGW extended 20 moa 10/22 base - how tall is it?

Well I found some info about the Volquartsen which I am assuming is pretty close in the same height at .480. I could make lows work with the Volquartsen but it would be really close so I am going with mediums with the EGW and I should have more then enough wiggle room. Hopefully the EGW is not over .50 tall.

 

[frog5215]

Re: EGW extended 20 moa 10/22 base - how tall is it?

.456" across the top of the rail in the rear
.348 in the rear most groove
.431 at the front of the receiver
.325 in the groove at the front mounting screw
extends about 2.3" in front of the front screw
about 6.5" overall length
Actual height will be about .020" less due to the concavity of the rail bottom to match the camber of the receiver top.

 

[hunter121]

Re: EGW extended 20 moa 10/22 base - how tall is it?

Frog your The MAN!I am happy I went with the mediums since the lows with the EGW wouldn't have worked. Thanks again, very helpfull!!