Electric powder measures
- Thread starter ken12
- Start date
Re: Electric powder measures
I first went from beam to RCBS 750, ran it for about a year, liked it,
Then treated myself to the Chargemaster.
I should have bought the chargemaster in the first place, it's a joy to use,
Re-programmed to speed it up a little, and never had any problems running varget thru it.
The mystical reloading gods use Prometheus machines, bathe in ass's milk,
And have 7 beautiful wives,
But I still love my chargemaster
I first went from beam to RCBS 750, ran it for about a year, liked it,
Then treated myself to the Chargemaster.
I should have bought the chargemaster in the first place, it's a joy to use,
Re-programmed to speed it up a little, and never had any problems running varget thru it.
The mystical reloading gods use Prometheus machines, bathe in ass's milk,
And have 7 beautiful wives,
But I still love my chargemaster
Re: Electric powder measures
My beam scale is faster than any electronic combo unit made, and it's way more accurite, but it also cost 6 times what a Chargemaster cost, so decide on how much you are willing to spend, my Gen 1 Prometheus replaced a Chargemaster.
My beam scale is faster than any electronic combo unit made, and it's way more accurite, but it also cost 6 times what a Chargemaster cost, so decide on how much you are willing to spend, my Gen 1 Prometheus replaced a Chargemaster.
Re: Electric powder measures
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: gfunkUK</div><div class="ubbcode-body">I first went from beam to RCBS 750, ran it for about a year, liked it,
Then treated myself to the Chargemaster.
I should have bought the chargemaster in the first place, it's a joy to use,
Re-programmed to speed it up a little, and never had any problems running varget thru it.
The mystical reloading gods use Prometheus machines, bathe in ass's milk,
And have 7 beautiful wives,
But I still love my chargemaster
</div></div>
no wife's, no baths, just a Japanese demigod......
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: gfunkUK</div><div class="ubbcode-body">I first went from beam to RCBS 750, ran it for about a year, liked it,
Then treated myself to the Chargemaster.
I should have bought the chargemaster in the first place, it's a joy to use,
Re-programmed to speed it up a little, and never had any problems running varget thru it.
The mystical reloading gods use Prometheus machines, bathe in ass's milk,
And have 7 beautiful wives,
But I still love my chargemaster
no wife's, no baths, just a Japanese demigod......
Re: Electric powder measures
The Chargemaster is the best one. Most of my reloading instruction is taught on one because that is what guys want to use rather than a beam scale. I know Hornady has theirs but I haven't tried it. But I've tried most of the others and I like the CM the best.
The Chargemaster is the best one. Most of my reloading instruction is taught on one because that is what guys want to use rather than a beam scale. I know Hornady has theirs but I haven't tried it. But I've tried most of the others and I like the CM the best.
Re: Electric powder measures
I bought the Pact Dispenser and Scale. While it is very good at dispensing powder accurately each time, I have found the electronic digital scales to be lacking in accuracy. The problem lies in the power source and in electromagnetic interference. I have found that every time the heater fan kicks on the scale goes haywire and don't even try to calibrate it while the heater is running. If it's not the electromagnetic interference being emitted by the fan motor then it is certainly the increased amperes being drawn on the circuit. I have also noticed issues when a cell phone is nearby. As well, the room is lit with florescent lights and the ballast for that may well affect it. After observing all of this and then seeing some big variations in muzzle velocities through the chronograph, I bought a RCBS 1010 scale.
If you want real accuracy from your beam scale without the big expense, there is a gentleman named Scott Parker who resides in CA. He can tune the 1010 scale and it will be capable of single kernel accuracy. I think he charges about $61.00 for tuning and return shipping, here's his email address: [email protected]
I bought the Pact Dispenser and Scale. While it is very good at dispensing powder accurately each time, I have found the electronic digital scales to be lacking in accuracy. The problem lies in the power source and in electromagnetic interference. I have found that every time the heater fan kicks on the scale goes haywire and don't even try to calibrate it while the heater is running. If it's not the electromagnetic interference being emitted by the fan motor then it is certainly the increased amperes being drawn on the circuit. I have also noticed issues when a cell phone is nearby. As well, the room is lit with florescent lights and the ballast for that may well affect it. After observing all of this and then seeing some big variations in muzzle velocities through the chronograph, I bought a RCBS 1010 scale.
If you want real accuracy from your beam scale without the big expense, there is a gentleman named Scott Parker who resides in CA. He can tune the 1010 scale and it will be capable of single kernel accuracy. I think he charges about $61.00 for tuning and return shipping, here's his email address: [email protected]
Re: Electric powder measures
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: gvanhyning</div><div class="ubbcode-body">I bought the Pact Dispenser and Scale. While it is very good at dispensing powder accurately each time, I have found the electronic digital scales to be lacking in accuracy. The problem lies in the power source and in electromagnetic interference. I have found that every time the heater fan kicks on the scale goes haywire and don't even try to calibrate it while the heater is running. If it's not the electromagnetic interference being emitted by the fan motor then it is certainly the increased amperes being drawn on the circuit. I have also noticed issues when a cell phone is nearby. As well, the room is lit with florescent lights and the ballast for that may well affect it. After observing all of this and then seeing some big variations in muzzle velocities through the chronograph, I bought a RCBS 1010 scale.
If you want real accuracy from your beam scale without the big expense, there is a gentleman named Scott Parker who resides in CA. He can tune the 1010 scale and it will be capable of single kernel accuracy. I think he charges about $61.00 for tuning and return shipping, here's his email address: [email protected]</div></div>
I cant remember the exact name of the part, you can pick them up at a computer store I believe... But its basically two magnets in a plastic case that you run your power cord through and then wrap it around one time. After that you shouldnt have anymore interference from your power source. If you look at some of your cords behind your computer you will see the part I am talking about.
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: gvanhyning</div><div class="ubbcode-body">I bought the Pact Dispenser and Scale. While it is very good at dispensing powder accurately each time, I have found the electronic digital scales to be lacking in accuracy. The problem lies in the power source and in electromagnetic interference. I have found that every time the heater fan kicks on the scale goes haywire and don't even try to calibrate it while the heater is running. If it's not the electromagnetic interference being emitted by the fan motor then it is certainly the increased amperes being drawn on the circuit. I have also noticed issues when a cell phone is nearby. As well, the room is lit with florescent lights and the ballast for that may well affect it. After observing all of this and then seeing some big variations in muzzle velocities through the chronograph, I bought a RCBS 1010 scale.
If you want real accuracy from your beam scale without the big expense, there is a gentleman named Scott Parker who resides in CA. He can tune the 1010 scale and it will be capable of single kernel accuracy. I think he charges about $61.00 for tuning and return shipping, here's his email address: [email protected]</div></div>
I cant remember the exact name of the part, you can pick them up at a computer store I believe... But its basically two magnets in a plastic case that you run your power cord through and then wrap it around one time. After that you shouldnt have anymore interference from your power source. If you look at some of your cords behind your computer you will see the part I am talking about.
Re: Electric powder measures
I've been running the Pact combo for around 15 years, and like it. Sure, it's not as good as the Prometheus, but I don't have any spare oil wells to option off for one.
But I'm still drilling....
I've been running the Pact combo for around 15 years, and like it. Sure, it's not as good as the Prometheus, but I don't have any spare oil wells to option off for one.
But I'm still drilling....
Re: Electric powder measures
I use my CM for all my reloading. It is accurate and throws charges of Varget and RL-15 within .1 gr. fairly consistently.
I never reweigh my charges except for my match ammo which I check on a beam scale. Those loads are thrown .3grs low by the CM and trickled up to the very last kernel for consistency.
I use my CM for all my reloading. It is accurate and throws charges of Varget and RL-15 within .1 gr. fairly consistently.
I never reweigh my charges except for my match ammo which I check on a beam scale. Those loads are thrown .3grs low by the CM and trickled up to the very last kernel for consistency.
Re: Electric powder measures
tastes as great as its name...
http://i117.photobucket.com/albums/o59/rq375/Prometheus.jpg[/IMG]
tastes as great as its name...
http://i117.photobucket.com/albums/o59/rq375/Prometheus.jpg[/IMG]
Re: Electric powder measures
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: jawa</div><div class="ubbcode-body">
I cant remember the exact name of the part, you can pick them up at a computer store I believe... But its basically two magnets in a plastic case that you run your power cord through and then wrap it around one time. After that you shouldnt have anymore interference from your power source. If you look at some of your cords behind your computer you will see the part I am talking about. </div></div>
FWIW, they're called ferrite beads (or chokes). They eliminate both EMI and RFI (electromagnetic & radio-frequency interference) that form from the oscillators within computers & other electronics. Essentially convert EMI/RFI into heat. RadioShack should have them.
They work both ways in that they choke EMI/RFI noise on the line going into a device (like your scale in this case) or coming out
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: jawa</div><div class="ubbcode-body">
I cant remember the exact name of the part, you can pick them up at a computer store I believe... But its basically two magnets in a plastic case that you run your power cord through and then wrap it around one time. After that you shouldnt have anymore interference from your power source. If you look at some of your cords behind your computer you will see the part I am talking about. </div></div>
FWIW, they're called ferrite beads (or chokes). They eliminate both EMI and RFI (electromagnetic & radio-frequency interference) that form from the oscillators within computers & other electronics. Essentially convert EMI/RFI into heat. RadioShack should have them.
They work both ways in that they choke EMI/RFI noise on the line going into a device (like your scale in this case) or coming out
