Gunsmithing Endmill?

[Field]

Where do you get them and what brand?

Thanks

 

[300sniper]

Re: Endmill?

since you have to ask i am going to assume you are new to machining. i'd order an enco catalogue so you start receiving their monthly sales fliers. the atrax carbide endmills are cheap enough to learn on and seem to work just fine. if you give an example of what you are working on and maybe the type of machine, we might be able to give some better advice on a specific endmill.

 

[chpprguy]

Re: Endmill?

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: 300sniper</div><div class="ubbcode-body">since you have to ask i am going to assume you are new to machining. i'd order an enco catalogue so you start receiving their monthly sales fliers. the atrax carbide endmills are cheap enough to learn on and seem to work just fine. if you give an example of what you are working on and maybe the type of machine, we might be able to give some better advice on a specific endmill. </div></div>

+1
and google is your friend...

https://www.jtsmachine.com/jtswebshop/as...p;prodcode=D210
http://www.shoprutlandtool.com/webapp/wc...CFSgYagodElbxAA

Once you know what you are looking for, you can keep an eye out at garage sales,ebay etc.... and save some coin usually....

 

[Victor N TN]

Re: Endmill?

MSC and Ried Supply are another couple of names you may want to get catalogs from.

 

[BLAWTON]

Re: Endmill?

Mcmastercarr and fastenal are a few more.