I had a couple 6CM rounds that failed to fire this weekend. They were Fed 210m primers. When ejected, the primers didnt look right. Any idea what caused this? The others primers looked fine.
This.Did you pull the bullet and see if there is powder in the case?
This is my thought too! I would break down the bolt and give it a good cleaning. And I would pull those bullets and look at that primer. Primers are very dependable but everyones QC got more relaxed during the Obama shortages and many of them never got better. Look to see if the anvil is missing or if the pellet is crushed or missing.My humble guess. Either not seated all the way or something going on with the rifle.
My humble guess. Either not seated all the way or something going on with the rifle.
They were for sure all at or below the case head and my seating tool adjustment remained the same. I did try to fire the 2x but no boom on the second try either.If the issue is them not being fully seated, they should go boom on second strike.