Fitting Savage target action to a stock

[Surgikill]

Hey guys, I would like to know what is involved in fitting a 3 screw savage target action to a stock. I plan on getting a stock with a blind magazine and then filling the cavity with epoxy. I would like to know if you pillar bed the middle screw, and how you drill the stock to properly align the screw.

Thanks.

 

[Capt Beach]

Hey guys, I would like to know what is involved in fitting a 3 screw savage target action to a stock. I plan on getting a stock with a blind magazine and then filling the cavity with epoxy. I would like to know if you pillar bed the middle screw, and how you drill the stock to properly align the screw.

Thanks.

If you are buying an after market stock for a Savage target action screw spacing should be 4.27" not the standard 4.4 for the 10 short action, me personally I'd select an after market stock with a full length aluminum bedding block and forget the bedding...no need..just make sure everything fits nice;y and torque it down correctly...