• Watch Out for Scammers!

    We've now added a color code for all accounts. Orange accounts are new members, Blue are full members, and Green are Supporters. If you get a message about a sale from an orange account, make sure you pay attention before sending any money!

GAP10 ShowEm Off Pics

Is anyone using a non POF lower for their gap10 POF Upper? I picked up a gen 1 Upper tonight and was wondering.
 
GAP-10 in .308 early results. MEN is NATO ball. All others hand loaded 168 MK.
 

Attachments

  • 001.JPG
    001.JPG
    240.1 KB · Views: 604
GAP 10 in 6mm Creedmoor
Area 419 Rail
Nightforce 4-16 ATACR with Mil XT Reticle
Area 419 2 port Hellfire
ATILLA 200 IR laser
Not shown:
PVS -30
Thunder Beast 6.5 Ultra 9
 

Attachments

  • EFCE240A-243D-434C-963C-989FF008CA87.jpeg
    EFCE240A-243D-434C-963C-989FF008CA87.jpeg
    485.1 KB · Views: 807
  • Like
Reactions: Black Bart
GAP 10 in 6mm Creedmoor
Area 419 Rail
Nightforce 4-16 ATACR with Mil XT Reticle
Area 419 2 port Hellfire
ATILLA 200 IR laser
Not shown:
PVS -30
Thunder Beast 6.5 Ultra 9

How does it shoot?
 
My gap 10s
 

Attachments

  • F6872A97-B0FB-46E5-B40B-65708A0E306A.jpeg
    F6872A97-B0FB-46E5-B40B-65708A0E306A.jpeg
    642.2 KB · Views: 327
  • 13AFC3E1-87A1-4888-9DA2-9741841A5DF6.jpeg
    13AFC3E1-87A1-4888-9DA2-9741841A5DF6.jpeg
    385 KB · Views: 323
  • Like
Reactions: bfoosh006
Had a few minutes to run to the range here is Hornady Precision Hunter 143 ELD-X. Clean rifle first shot 9 0’clock next 4 in bulls.
6D9AB98A-2042-4F72-9A4D-5FD4524F3EC2.jpeg

The 3 round at the 10 are Hornady Outfitter 120 GMX.
5134F849-7E12-48C7-962D-137EF7F51E49.jpeg
 
GAP-10 in .308 early results. MEN is NATO ball. All others hand loaded 168 MK.

That's some nice shooting. What load are you shooting on the handloads? Brass, powder, etc? I'm revisiting my GAP-10 after many years in the safe and want to work up some loads for it. Thanks.

Edit: Nevermind on the powder, I see now the notes on the target pics. What brass are you using?
 
Last edited:
Anyone have any experience with the the old style gap 10 manufactured by hogan and the new style manufactured by seekins. Interested in the accuracy of both of them are lighter now. I had a pof p415 and pof p308 and they were tanks.
 
Anyone have any experience with the the old style gap 10 manufactured by hogan and the new style manufactured by seekins. Interested in the accuracy of both of them are lighter now. I had a pof p415 and pof p308 and they were tanks.
I have the gen 2 seekins model in 6.5cm and it shoots 1/2 moa with hornady 143 eldx
 
  • Like
Reactions: Mj30wilson900
Anyone have any experience with the the old style gap 10 manufactured by hogan and the new style manufactured by seekins. Interested in the accuracy of both of them are lighter now. I had a pof p415 and pof p308 and they were tanks.

Hi have MA-Ten in 6mm Creedmoor that GA Precision built for me. Not a Seekins, but it shoots pretty well.

IMG_2897.jpg
IMG_7667.JPG
 
My nighttime Texas hog hunting rifle - older GAP10 (circa 2013) with US Optics scope, PVS-22 & AAC 762SD can. It shoots about 3/4 MOA at 200 yards with Remington Hog Hammer ammo (168 grain Barnes TSX bullet), which is accurate enough for the job at hand.
 

Attachments

  • GAP 10.jpg
    GAP 10.jpg
    259.1 KB · Views: 256
Re: GAP10 ShowEm Off Pics

P1020001.jpg


My new girl:
.308 in 18" barrel
Atlas Bipod
Nightforce 3.5x15 with NP1 reticle ( thinking of going 5.5x22 with NP-R1)
SAS quick detach muzzle brake for the SAS 7.62 Titanium Supressor
Initial Break-in and groups were excellent with 175g FGMM, 5 shot group covered with a dime @ 100yds.
Going to use Lapua brass, 175g MK, CCI BR2 primers to start working on loads.
Many thanks to Snipershide, GA Precision, and Mile High Shooting for my dream rifle!
If your purpose for the GUN is what I think it is, that NF should be perfect for 800 yds. I have a mew ATCR 5x25x56 fI moa that is as new as. When it came out of box. I sold the gun for it before the scope came. I paid a street price of 3200...2300$ and it yours if you want it...I’m buying another Tangent Theta...IM me if your interested. Nice GUN.....
 
Here is mine. Caliber is the 6mm Creedmoor. Scope up top is the Bushnell HDMR with the GAP G2 reticle sitting in the Badger mounts that is provided with the GAP10 rifle. I am using a Harris bipod with the DLOC-S from Phoenix Tactical and a monopod from Accu-Shot. The paint is cerakote and was applied by me.

I am currently shooting the 105 Hornady BTHP with AMP jackets at about 3050 fps. I haven't shot for groups much yet as I have been busy killing coyotes with it and just don't have enough ammo to justify "wasting it" on things that don't have fur on them. The few groups I have shot indicate that this will hold in the 3/8 inch size range with ease.

Add your pics to the topic.

GAP10_RS.jpg


GAP10_LS.jpg
Nice picture of the grass with a watermark. :alien:
 
My 1000+ Yard Precision Sniper Rifle.

Early 2013 GAP-10 (Gen-1) in 308 caliber with 22" Bartlein Barrel and SL8 Adjustable Gas Block in dark FDE color.

-Bushnell DMR-II with G3 Reticle
-Spuhr 34mm Cantilever Scope Mount. SP-4016
-SL8 Adjustable Gas Block
-Harris BR Bipod

-She is a Beauty and a Tack Driver


Here are 2 Groups 5 shots each at 100 yards. Group sizes were just a tad over 1/4" and I was using Factory Hornady 168gr AMAX


GAP10 Left Side.jpg
GAP10 Right Side.jpg
GAP-10 Side View.jpg
5 Shot Group.jpg
5 Shot Group #2.jpg
 
Last edited:
My 1000+ Yard Precision Sniper Rifle.

Early 2013 GAP-10 (Gen-1) in 308 caliber with 22" Bartlein Barrel and SL8 Adjustable Gas Block in dark FDE color.

-Bushnell DMR-II with G3 Reticle
-Spuhr 34mm Scope Mount
-SL8 Adjustable Gas Block
-Harris BR Bipod


Here are 2 Groups 5 shots each at 100 yards. Group sizes were just a tad over 1/4" and I was using Factory Hornady 168gr AMAX


View attachment 7626194View attachment 7626195View attachment 7626196View attachment 7626197View attachment 7626198
Really great shooting, congrats.
 
  • Like
Reactions: 3guns2hands
Upgraded my GAP-10 with a : ( See previous set-up above from last thread posted.)

Bushnell DMR-II Pro with G3 Reticle and ED Glass
Geissele SD-E / 2 Stage Match Trigger
MagPul MIAD Grip
Harris Swivel BR Bipod with Pod-Lok

Took her out to 300 yards today and shot 5 rounds into a nice .715" center to center group using Factory 168 grain Hornady AMAX.






 
Last edited:
Great pics everyone!

I really want a GAP-10 in .308. Shoot me a message if you are considereing selling one.
 
STOP ! OK,
I've had enough. I want to sell some stuff I haven't shot for a few years and buy or build a AR-10.

I want to replace my Sako TRG-22 I don't shoot anymore. Looking for help for a 16-18 inch barrel AR-10 build that can shoot 1/2 (ish) MOA with premium optics.
I like my Hk MR556 gas piston rifle over my AR-15 DI guns only cause of the easier clean up and put up.

Does Georga make a piston GAP 308?

Sorry for the intrusion, but I need help on a build / buy
 
I would call this a Piston Driven version of the GAP-10. While I have owned many GAP-10 Rifles in the past, this one is a High End Built to Specs, Piston Driven 308 Precision Rifle that utilizes a 22" Bartlein 5R Stainless Match Barrel with 1x10 Twist, This Rifle is Capable of 3/8" MOA Accuracy, and Guarantees Sub MOA Accuracy. This is an F&D Defense FD-308 Precision that has all the upgrades like a Geissele High Speed National Match Trigger, MagPul PRS Stock, Magpul MIAD Grip, 22" Bartlein Match Barrel, Side Charging Handle, and Adjustable Piston Driven Gas System. The Fit and Finish of this Rifle is Amazing.

F&D Defense FD-308 Precision
Schmidt & Bender PM-II 5-25x56mm Scope
Spuhr SP-4016 CantiLever Mount
Harris SBR Bipod with PodLok
Utilizes MagPul PMags.
AAC 51T BrakeOut for Suppressor.





Got any group pictures?
 
New to me GAP-10 308 20 inch barrel. Former KCMO Police rifle, and now a nice intermediate range gun to store in my closet while I pretend to use it.
After payday it will probably get a Steiner T6xi 3-18x, and then will need better pictures for sure.

My buddy grabbed the next rack number to this one, and lucked out on "coolness points" since it still has its rack number and stickers on the receiver.

GAP-10 KCPD Rifle.jpg
 
By chance, I just watched that last night

Mixed up his dope, and showed he can make the hits if he had the correct kestrel data.

But… I don’t know how you don’t know your 1k 6.5cm dope vs your 308 dope.

Especially considering going at the 1k
 
  • Like
Reactions: BoltRunner
How does it shoot?
I’ve only had it for about 12 months and so far I love it. Its really nice to have a semi auto rifle that’s just as accurate as my custom long range bolt guns. I've been able to shoot factory Hornady ELD-X 103gr and group 1/4”-1/2” MOA at 100 yards. Its the perfect Long-range predator rifle that you can also deer hunt with.