• Quick Shot Challenge: Caption This Sniper Fail Meme

    Drop your caption in the replies for the chance to win a free shirt!

    Join the contest

Rifle Scopes GDI P-ROM L-Model™ (Rifle Optic Mount) 0MOA

KillShot

KillShot

Major Hide Member
Full Member
Minuteman
May 25, 2010
2,361
8
Tulsa, Oklahoma
#1
Now available and mine is on order. I received email notification today that my 25 MOA GDI mount is due to be shipped in a couple of weeks so I contacted Kate at GDI and she swapped my order for me. Needless to say, I'm pretty stoked in anticipation of receiving this baby!



<span style="font-weight: bold">GDI Engineering P-ROM L-Model™ (Rifle Optic Mount) 0MOA

Availability: In stock

$500.00
Quick Overview
Please allow 8-10 weeks for delivery.


P-ROM L-Model™ (Rifle Optic Mount) 30mm Ring Diam.  I  0 MOA (P/N PRL3000)
Rifle Optic Mount for  use with Telescopic Scopes.  Adapter Kit available for Trijicon® RMR / Aimpoint® Micro / Insight® MRDS Red Dot Sights


P-ROM L-Model™ (Rifle Optic Mount) 34mm Ring Diam.  I  0 MOA (P/N PRL3400)
Rifle Optic Mount for  use with Telescopic Scopes.  Adapter Kit available for Trijicon® RMR / Aimpoint® Micro / Insight® MRDS Red Dot Sights</span>

promfirstrun_8_1.jpg

promfirstrun_20_1.jpg


 
#3
Re: GDI P-ROM L-Model™ (Rifle Optic Mount) 0MOA

Well, seeing as how I already had the other one on order and I'm not a 'commercial' buyer, I'll be paying full retail for mine. =\
 
#5
Re: GDI P-ROM L-Model™ (Rifle Optic Mount) 0MOA

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: NeoItaly</div><div class="ubbcode-body">So 30% off 500.00?</div></div>

Yes. The sale price is $350 and you will never be able to get it at that price again.
 
#7
Re: GDI P-ROM L-Model™ (Rifle Optic Mount) 0MOA

I've been wondering that myself. I'm looking to mount my Nightforce F1 onto my Larue OBR 7.62 and saw this GDI.

I was a bit surprised at the price and have been trying to figure out what makes more than twice the price of a Larue or Bobro.

Not knocking the GDI, am actually quite interested, but just curious what it does that the Larue or Bobro don't... or for that matter the Aadland. (I don't care about marring unless it affects accuracy)
 
#8
Re: GDI P-ROM L-Model™ (Rifle Optic Mount) 0MOA

There is a lot of work in the GDI, the locks are consistent and adjust to any rail with out marring them or without needing special tools.

These are more on par with a Spuhr mount which is also a $450+ mount, just not a throw lever, so you really should compare it to that, more so than a Larue or Bobro. Sure you can say they do the same thing but so does a Ford when you compare it to a Mercedes.

Being able to add the mounting plate to any one of the four positions, that is another feature not found in the other mounts discussed, which is found in the Spuhr.

It's not designed for everyone, and it's not marketed to everyone, so if you can't afford it, simply move on and get what you can. It's not a big deal.

But when it comes to me personally using a mount of this type, I use the GDI, or I use the Spuhr.

You can walk around and find Larue mounts that have loosened up all the time, the front lever is not captured, they require a special tool and over tightening them results in a damaged rail. Pretty easy if you ask me.
 
#9
Re: GDI P-ROM L-Model™ (Rifle Optic Mount) 0MOA

I wonder why Larue doesn't make the front lever the same as the rear... I find that so strange.

LL just found another post you made on the GDI mount. Which makes me wonder about the "other" mounts. Didn't realize they were specd out for 300 yards.

I'm having a hard time finding actual non-biased repeatability tests on Larue mounts.

You know, at the intro price of $350, it's only $100 more than the Larue or Bobro, and if it really is the cream of the crop in repeatability, shoot, put me down for a few at that price.

(Anyone know if you're limited to ordering only one?)
 
#10
Re: GDI P-ROM L-Model™ (Rifle Optic Mount) 0MOA

I never said I couldn't afford it. I just want to know what makes something have such a value to it. I have a 3000.00 FN Scar 17s, so I think I can afford it. I just like to be educated in what I am spending my cash on...
 
#11
Re: GDI P-ROM L-Model™ (Rifle Optic Mount) 0MOA

I am doing a comparison video, I have everything mounted up and initially zeroed the weather just hasn't been cooperating for me. But I have 2 Larue and 2 GDI ready to roll.

If you look at the progression of the throw lever mount, it is really for the assaulter on an M4, all they really did was take that design and added it to a longer range weapon system, but really it was never meant for that. The GDI was specifically designed to address a precision rifle so that the repeatability matched the accuracy of the system it was being used with.

Another factor, the vertical rings on the Larue, is not optimal for a shooter in the prone behind the rifle. It's right there where your adjustment falls. Which is why mounts like the Spuhr or GDI make sure they don't block the view from the rear. With an M4 it doesn't matter, with a precision rifle it does.

The final factor with the GDI is, being new, they are using pretty expensive state of the art machines which will drive the cost up a bit but aids in consistency. It may not be a huge factor but it is definitely a cost factor when you're starting out.
 
#13
Re: GDI P-ROM L-Model™ (Rifle Optic Mount) 0MOA

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: KillShot</div><div class="ubbcode-body">Now available and mine is on order. I received email notification today that my 25 MOA GDI mount is due to be shipped in a couple of weeks so I contacted Kate at GDI and she swapped my order for me. Needless to say, I'm pretty stoked in anticipation of receiving this baby!



<span style="font-weight: bold">GDI Engineering P-ROM L-Model™ (Rifle Optic Mount) 0MOA

Availability: In stock

$500.00














Quick Overview
Please allow 8-10 weeks for delivery.


P-ROM L-Model™ (Rifle Optic Mount) 30mm Ring Diam.  I  0 MOA (P/N PRL3000)
Rifle Optic Mount for  use with Telescopic Scopes.  Adapter Kit available for Trijicon® RMR / Aimpoint® Micro / Insight® MRDS Red Dot Sights


P-ROM L-Model™ (Rifle Optic Mount) 34mm Ring Diam.  I  0 MOA (P/N PRL3400)
Rifle Optic Mount for  use with Telescopic Scopes.  Adapter Kit available for Trijicon® RMR / Aimpoint® Micro / Insight® MRDS Red Dot Sights</span>

promfirstrun_8_1.jpg

promfirstrun_20_1.jpg


</div></div>



Mine is due to ship out the 17th. Ive been thinking of asking to change mine to a 34mm from the 30 I ordered. I really should have ordered one of each with the sale price (sigh)
 
#14
Re: GDI P-ROM L-Model™ (Rifle Optic Mount) 0MOA

Only you can answer that...

the object is to have a one mount solution for multiple systems, if you don't have another rifle to move it too, then yes. If the idea is to permanently mount one of those scopes, then why not use a more permanent solution ?

Don't know what you plans are, a Scar alone isn't enough to say.
 
#15
Re: GDI P-ROM L-Model™ (Rifle Optic Mount) 0MOA

Right now, I have my NXS mounted in the American Defense Recon mount. It has never failed or given me any issues and it was only $189.

So, why have i purchased the GDI mount? I have purchased the GDI mount because I believe it to be the best mount on the market and I like knowing that no matter what, my gear is good to go.

Although it is highly unlikely that I will need to rely on its ruggedness, it feels to know know that this mount can and will take any abuse I could put it through and at the end of the day, maintain its accuracy.
 
#17
Re: GDI P-ROM L-Model™ (Rifle Optic Mount) 0MOA

I personally witnessed a GDI PROM-L mount on a 7WSM hit a one minute target at 1000 yards and continue to hit the target while being removed and reattached in between rounds.
 
#27
Re: GDI P-ROM L-Model™ (Rifle Optic Mount) 0MOA

LL, does the GDI mount anywhere on an AE pic rail ie does it run into the same issues as the Spuhr or does the mounting system avoid that small problem ?
 
#28
Re: GDI P-ROM L-Model™ (Rifle Optic Mount) 0MOA

Looking forward to the videos LL. Pretty certain I'll be picking up a couple.

Any suggestions for a permanent solution on an AR in 308?
 
#29
Re: GDI P-ROM L-Model™ (Rifle Optic Mount) 0MOA

Just got the same email from Kate and the pending shippments of the P-ROM 25MOA mounts very excited. Have had them on order for somthing like 3 months. I am replacing all of my LaRue mounts from the LT104's down to my LT660's mounts.

LaRue has final worn on me with the loosening and Zeroing issues not to mention the marring.
 
#30
Re: GDI P-ROM L-Model™ (Rifle Optic Mount) 0MOA

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Lowlight</div><div class="ubbcode-body">if you get the 0 moa one I suppose you can, but the others have a cant built in.

but on a flat top semi I would get one with a cant built in, more flexibility </div></div>

Why do you need a cant????
 
#31
Re: GDI P-ROM L-Model™ (Rifle Optic Mount) 0MOA

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: NeoItaly</div><div class="ubbcode-body"><div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Lowlight</div><div class="ubbcode-body">if you get the 0 moa one I suppose you can, but the others have a cant built in.

but on a flat top semi I would get one with a cant built in, more flexibility </div></div>

Why do you need a cant????</div></div>

You don't "need" a cant but if you're shooting beyond 1000yds, the added elevation is very helpful. I opted for the 0MOA because it's mounted on my P308 and I won't be shooting beyond 700yds, simply because there's nowhere around that I would be shooting that far. If you're mounting the GDI on something like a .338 LM, Cheytac, .50 BMG or other extended long range rifle then you definitely want the 25 MOA model.
 
#32
Re: GDI P-ROM L-Model™ (Rifle Optic Mount) 0MOA

Thanks for clearing that up. I am just wondering how bad the levers will be in the way of the charging handle on my Scar 17s. Since its on the left side as well. That's why most people use the Larue and just reverse it.
 
#33
Re: GDI P-ROM L-Model™ (Rifle Optic Mount) 0MOA

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: NeoItaly</div><div class="ubbcode-body">Thanks for clearing that up. I am just wondering how bad the levers will be in the way of the charging handle on my Scar 17s. Since its on the left side as well. That's why most people use the Larue and just reverse it. </div></div>

Well, as Lowlight stated, these mounted are intended to be used on a precision rifle so it may not be what you're wanting. That being said, if you look real closely at the levers, they are pretty low profile which I doubt would be an issue but that is merely speculation.

It goes without saying that $350-$500 is a lot to spend in a mount, especially for it to arrive and you not like it or it not work for your application. I don't see why you couldn't flip the 0MOA mount around so the levers would be on the right side of the rifle and that may be an option for you.
 
#34
Re: GDI P-ROM L-Model™ (Rifle Optic Mount) 0MOA

AAAH...Cant built in, Roger that...<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Lowlight</div><div class="ubbcode-body">if you get the 0 moa one I suppose you can, but the others have a cant built in.

but on a flat top semi I would get one with a cant built in, more flexibility </div></div>
 
#36
Re: GDI P-ROM L-Model™ (Rifle Optic Mount) 0MOA

Sigh, sad that I missed out on the 25moa sale. Anyone want to trade one of their 25 moas for a 0moa? :p
 
#42
Re: GDI P-ROM L-Model™ (Rifle Optic Mount) 0MOA

GDI send the banner over today for the Promo regarding the 0 MOA Mount

PROM-0MOA-Promo_022712.jpg



You’ve been asking and they are delivering! GDI is releasing the 0 MOA base model of the popular recently released P-ROM L-Model™ (Rifle Optic Mount). The P-ROM L-Model™ is a new telescopic scope mount with an available selection of GDI’s proprietary red dot sight Adapter Plate System (APS) to accommodate the Trijicon® RMR, Aimpoint® Micro T-1, H-1, R-1, and Insight® MRDS.

This P-ROM L-Model™ (Rifle Optic Mount) promotion includes two variants:
• 30mm Ring Diam. l 0 MOA Base
• 34mm Ring Diam. l 0 MOA Base

GDI has a 25 MOA Base model available for purchase as well.

As with all GDI mounts, the P-ROM L-Model™ (Rifle Optic Mount) features:
• GDI’s proprietary Auto-Locking Quick Detach (ALQD™) lever system
• Adjusts to Out-of-Spec M1913 Picatinny Rails
• Has a non-abrading rail lock down feature that will not mar rails
• Provides enhanced eye-relief
• Offers a return to zero of .01 MOA

The mount will be available for purchase through GDI’s promotion from March 20 through April 22 with an unprecedented 30% discount to our commercial customers – a $500 value for $350. This discount will never be offered again on this mount.

Additionally, from today through March 19th, anyone that "Likes" GDI mounts on Facebook and completes the online form will have the opportunity to receive a “Special Gift” with their P-ROM L-Model™ order.

But that's not all! GDI is still giving away one of their premium grade, 100% ring-spun cotton, GDI "Gun Metal" T-Shirts to one lucky winner for every 100 new Facebook fans that GDI receives. This give-away will run until GDI reaches 2500 Facebook fans. To win a premium GDI t-shirt.....Go to the GDI Facebook page NOW! www.facebook.com/gdimounts

At 2500 Facebook fans, GDI will then raffle off two (2) P-ROM L-Model™ (Rifle Optic Mount) models.

Visit www.facebook.com/gdimounts, hit the "Like" button, and enter your name in the fields provided.

For every 100 fans, GDI will announce the winners of a t-shirt. Stay tuned and visit often!
 
#43
Re: GDI P-ROM L-Model™ (Rifle Optic Mount) 0MOA

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: KillShot</div><div class="ubbcode-body">As told to me by Kate at GDI:

The P-ROM optic centerline axis above rail height is 1.535".
  </div></div>

So then it should fit a 56mm S&B then, correct?
 
You must log in or register to reply here.

Similar threads

Lowlight
The Everyday Sniper Podcast Marco from GDI Talking the PROM L Model and More....
Replies
0
Views
236
Lowlight
Lowlight
Lowlight
  • Sticky
Precision Rifle Gear We did it ! Reopened GDI QD Mounts
Replies
0
Views
1K
Lowlight
Lowlight
L
Optics [WTS] Aimpoint H-2, T-1, Pro Optics, ADM & GDI mounts, Nightforce Unimount, KAC Micro Rear 200-600m, Bushnell 1-Mile ARC CONX Rangefinder
Replies
2
Views
266
LR-Enthusiast
L
Ratmansqullius
Optics Half off Scope/Red Dot Mounts
Replies
2
Views
361
Ratmansqullius
Ratmansqullius
buffalowinter
SOLD Glock 17/34 Longslide Custom IPSC 3 Gun Pistol TTI, ZA, Timney
Replies
2
Views
400
buffalowinter
buffalowinter
Top Bottom
Back
Home
Forums
Merch
Alerts